Search results
Results from the WOW.Com Content Network
The Mitsubishi 3G8 engine is a range of three-cylinder powerplant from Mitsubishi Motors, introduced in the fifth generation of their Mitsubishi Minica kei car.In common with other contemporary engines in the class, it could be specified with many advanced technologies despite its diminutive size, including multi-valve cylinder heads and double overhead camshafts.
The M176/M177/M178 is a petrol V8 engine range designed by Mercedes-AMG, replacing the M278 and M157 engines, and is based on the M133 engine. [1]The engine has two BorgWarner turbochargers positioned between the two cylinder heads in a "hot-V" configuration.
The GMC straight-6 engine was a series of gasoline-powered straight-six engines introduced in the 1939 model year by the GMC Trucks division of General Motors.Prior to the introduction of this new engine design GMC trucks had been powered by straight-six engines designed by the Buick, Pontiac and Oldsmobile divisions of GM.
The Universal Atomic 4 is a four-cylinder, gasoline engine produced by the Universal Motor Company between 1949 [1] and 1984 for use as auxiliary power on sailboats. [2] Both 18 horsepower (13 kW) and 30 horsepower (22 kW) versions of the engine were produced. [ 3 ]
210 hp (157 kW) at 2800 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 8.5:1. Base IO-360 model: a six-cylinder air-cooled, horizontally opposed direct drive, fuel injected engine. Base IO-360 model: a six-cylinder air-cooled, horizontally opposed direct drive, fuel injected engine.
A gas cylinder quad, also known as a gas cylinder bundle, is a group of high pressure cylinders mounted on a transport and storage frame. There are commonly 16 cylinders, each of about 50 litres capacity mounted upright in four rows of four, on a square base with a square plan frame with lifting points on top and may have fork-lift slots in the ...
The maximum output of 700 PS (690 hp, 515 kW) at 3,000 rpm. Maximum torque is 1850 Nm (1364.5 ft lbs) at 2,100 rpm. Typical output was 600 PS (592 hp, 441 kW) at 2,500 rpm. The crankcase and block of the HL230 were made of grey cast iron and the cylinder heads from cast iron. The engine weighed 1200 kg and its dimensions were 1,000 mm × 1,190 ...
The engines range from 843 to 993 cc and have been manufactured in petrol and diesel-driven series. They have cast iron engine blocks and aluminum cylinder heads, and are of either SOHC or DOHC design, with belt driven heads. The engine first appeared in the all-new Daihatsu Charade in October 1977, in "CB20" form. [1]