Search results
Results from the WOW.Com Content Network
The 153 cu in engine had a 3 + 7 ⁄ 8-inch (98 mm) bore and 3 + 1 ⁄ 4-inch (82.6 mm) stroke, with two overhead valves per cylinder actuated by pushrods and a 1-3-4-2 firing order. The Chevy II 's 194 cu in six-cylinder used a 3 + 9 ⁄ 16 -inch (90.5 mm) bore, which by 1964 was enlarged to match the 153 four-cylinder's resulting in a ...
The Chevrolet Stovebolt engine is a straight-six engine made in two versions between 1929 and 1962 by the Chevrolet Division of General Motors.It replaced the company's 171-cubic-inch (2.8 L) inline-four as their sole engine offering from 1929 through 1954, and was the company's base engine starting in 1955 when it added the small block V8 to the lineup.
[4] [26] A manual fuel shut-off valve is also supplied, [4] and some also have a manual throttle. [4] Although the Zenith Model A carburetor was fitted to the engines in the vast majority of Ford Model A cars (reportedly to 3.5 million of the approximately 4.8 million built [27]), it was not the only carburetor used. Another 19 brands were ...
The smallest-displacement engine of the 385 engine family, the 370 was introduced in 1977, replacing the 361 cu in (5.9 L) 360 Truck (FT) V8. Sharing its 3.59-inch stroke with the 429, the 370 was designed with a downsized 4.05-inch bore (shared with its predecessor and the 390 V8).
It has a 4.125-inch (104.8 mm) bore and a 3.750-inch (95.25 mm) stroke. The 400 differed from other small-blocks in that the cylinders were siamesed and therefore required 'steam' holes in the block, head gaskets, and heads to help alleviate 'hot-spots' in the cooling system at the point above the siamesed cylinders.
Both the 199 and 232 featured a 3 + 3 ⁄ 4 in (95.3 mm) bore, and either a 3 in (76.2 mm) or 3 + 1 ⁄ 2 in (88.9 mm) stroke. The 199 was discontinued in 1970; the 232 was offered alongside the 258 cu in (4.2 L) (made by using a 3.895 in (98.9 mm) stroke crankshaft and slightly taller block) during the 1970s, but was discontinued in 1979.
The 4JB1 is a 4-cylinder naturally aspirated watercooled in-line direct injection and also a high revving high output diesel engine with its VE rotary injection pump. Horse power is 90ps industrial version. torque is 135 lb.-ft. at 2000 rpm . while the light version 4JB1 uses gear type oil pump and Bosch "A" Type mechanical injection.
Perkins Diesel Conversions & Factory fitted units, by Allan T. Condie, 2nd edition 2000, ISBN 0-907742-79-3 The 4 107T was used in UK Military electricity generating sets, the engines when in need an overhaul were rebuilt by a Kent based engineering works in Ramsgate, adjacent to the inner Harbour known as Walkers Marine (Marine Engineers) Ltd. Houchins of Ashford an MOD contractor would send ...