enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. IEEE 802.11n-2009 - Wikipedia

   en.wikipedia.org/wiki/IEEE_802.11n-2009

   An 802.11n-only network may be impractical for many users because they need to support legacy equipment that still is 802.11b/g only. In a mixed-mode system, an optimal solution would be to use a dual-radio access point and place the 802.11b/g traffic on the 2.4 GHz radio and the 802.11n traffic on the 5 GHz radio. [20]

3. List of WLAN channels - Wikipedia

   en.wikipedia.org/wiki/List_of_WLAN_channels

   Wireless LAN (WLAN) channels are frequently accessed using IEEE 802.11 protocols. The 802.11 standard provides several radio frequency bands for use in Wi-Fi communications, each divided into a multitude of channels numbered at 5 MHz spacing (except in the 45/60 GHz band, where they are 0.54/1.08/2.16 GHz apart) between the centre frequency of the channel.

4. 2.4 GHz radio use - Wikipedia

   en.wikipedia.org/wiki/2.4_GHz_radio_use

   Using cordless phones that do not use the 2.4 GHz band. Using the 5 GHz band. DECT 6.0 (1.9 GHz), 5.8 GHz or 900 MHz phones, commonly available today, do not use the 2.4 GHz band and thus do not interfere. VoIP/Wi-Fi phones share the Wi-Fi base stations and participate in the Wi-Fi contention protocols.

5. Long-range Wi-Fi - Wikipedia

   en.wikipedia.org/wiki/Long-range_Wi-Fi

   The 802.11-2007 standard adds 10 MHz and 5 MHz OFDM modes to the 802.11a standard, and extend the time of cyclic prefix protection from 0.8 μs to 3.2 μs, quadrupling the multipath distortion protection. Some commonly available 802.11a/g chipsets support the OFDM 'half-clocking' and 'quarter-clocking' that is in the 2007 standard, and 4.9 GHz ...

6. IEEE 802.11 - Wikipedia

   en.wikipedia.org/wiki/IEEE_802.11

   This Linksys WRT54GS, a combined router and Wi‑Fi access point, operates using the 802.11g standard in the 2.4 GHz ISM band using signalling rates up to 54 Mbit/s. IEEE 802.11 Wi-fi networks are the most widely used wireless networks in the world, connecting devices like laptops (left) to the internet through a wireless router (right).

7. IEEE 802.11 (legacy mode) - Wikipedia

   en.wikipedia.org/wiki/IEEE_802.11_(legacy_mode)

   It specified two raw data rates of 1 and 2 megabits per second (Mbit/s) to be transmitted via infrared (IR) signals or by either frequency hopping or direct-sequence spread spectrum (DSSS) in the Industrial Scientific Medical frequency band at 2.4 GHz. IR remained a part of the standard until IEEE 802.11-2016, but was never implemented.