enow.com Web Search

  1. Ads

    related to: emulsified asphalt tack coat

Search results

  1. Results from the WOW.Com Content Network
  2. Sealcoat - Wikipedia

    en.wikipedia.org/wiki/Sealcoat

    The process is typically a two-coat application which requires 24 to 48 hours of curing before vehicles can be allowed back on the surface. Once the surface is properly prepared, then properly mixed sealer will be applied at about 1.5 square meters per liter (60 sq ft per U.S. gal; 72 sq ft per Imp gal) per coat.

  3. Otta seal - Wikipedia

    en.wikipedia.org/wiki/Otta_seal

    Otta seal is formed by adding graded aggregate to a soft bituminous binding agent. The agent is usually emulsified asphalt.Bituminous binder application rates are between 1.9 liter/m 2 (0.42 US gallon/yard 2) and 2.4 liter/m 2 (0.53 US gallon/yard 2) – the value is dependent on aggregate gradation and type.

  4. Highway engineering - Wikipedia

    en.wikipedia.org/wiki/Highway_engineering

    A tack coat is a low viscosity asphalt emulsion that is used to create a bond between an existing pavement surface and new asphalt overlay. Tack coats are typically applied on adjacent pavements (curbs) to assist the bonding of the HMA and concrete. [18]

  5. Chipseal - Wikipedia

    en.wikipedia.org/wiki/Chipseal

    The surface lasts for 5–7 years. Patch work can be done with a bucket of tar sealer and more chip seal over the top. The chip seal matt surface handles thermal variation well and doesn't crack like asphalt roads. A thin penetrating emulsion primer (PEP) coat is usually applied over the gravel before the chip seal matt is applied.

  6. Road surface - Wikipedia

    en.wikipedia.org/wiki/Road_surface

    The asphalt millings are blended with asphalt emulsion, foamed bitumen, or soft bitumen to rejuvenate the aged asphalt binder. [34] [36] New aggregate may also be added. The resulting asphalt mix is paved and compacted. It may serve as the top pavement layer, or it may be overlaid with new asphalt after curing. [37]

  7. Damp proofing - Wikipedia

    en.wikipedia.org/wiki/Damp_proofing

    Barriers may be a coating or membrane applied to the exterior of the concrete. The coating may be asphalt, asphalt emulsion, a thinned asphalt called cutback asphalt, or an elastomer. [9] Membranes are rubberized asphalt or EPDM rubber. Rubberized products perform better because concrete sometimes develops cracks and the barrier does not crack ...

  1. Ads

    related to: emulsified asphalt tack coat