Search results
Results from the WOW.Com Content Network
The conversion between the prefix units are as follows: 1000 mm 3 = 1 cm 3, 1000 cm 3 = 1 dm 3, and 1000 dm 3 = 1 m 3. [1] The metric system also includes the litre (L) as a unit of volume, where 1 L = 1 dm 3 = 1000 cm 3 = 0.001 m 3.
L US spelling: liter one cubic decimetre 1.0 L (0.22 imp gal; 0.26 US gal) L L decilitre: dl dl US spelling: deciliter: 1.0 dl (3.5 imp fl oz; 3.4 US fl oz) dL dL centilitre: cl cl US spelling: centiliter: 1.0 cl (0.35 imp fl oz; 0.34 US fl oz) cL cL millilitre: ml ml US spelling: milliliter one cubic centimetre
The litre (Commonwealth spelling) or liter (American spelling) (SI symbols L and l, [1] other symbol used: ℓ) is a metric unit of volume. It is equal to 1 cubic decimetre (dm 3 ), 1000 cubic centimetres (cm 3 ) or 0.001 cubic metres (m 3 ).
The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above) A flex-fuel vehicle will experience about 76% of the fuel mileage MPG when using E85 (85% ethanol) products as compared to 100% gasoline.
Volume Unit of measure cubic metre litre Reference size Usage 1 cubic metre = 1 = 1000: base unit in SI : 1 barrel = 0.158 987 294 928 = 158.987294928 = 42 US gallons = 9,702 cubic inches
Both the 42-US-gallon (159 L) barrels (based on the old English wine measure), the tierce (159 litres) and the 40-US-gallon (150 L) whiskey barrels were used. Also, 45-US-gallon (170 L) barrels were in common use. The 40 gallon whiskey barrel was the most common size used by early oil producers, since they were readily available at the time.
the volume of a cube of side length one decimetre (0.1 m) equal to a litre 1 dm 3 = 0.001 m 3 = 1 L (also known as DCM (=Deci Cubic Meter) in Rubber compound processing) Cubic centimetre [5] the volume of a cube of side length one centimetre (0.01 m) equal to a millilitre 1 cm 3 = 0.000 001 m 3 = 10 −6 m 3 = 1 mL Cubic millimetre
For example, if a unit has the symbol "imp gal", and if the link is @[[Gallon]], then if the symbol is linked, it would appear as "imp gal" ("imp" and "gal" link two different articles). The Links section defines exceptions for unit codes with an SI prefix, where the linked article is different from that of the base unit.