Search results
Results from the WOW.Com Content Network
Imagine a Wi-Fi base station having a speed of 20 Mbit/s and an average packet size of 750 byte. How large should the IP queue be? A voice over IP client should be able to transmit a packet every 20 ms. The estimated maximum number of packets in transit would then be: Estimated buffer size = 20000000 * 0,020 / 8 / 750 = 66
TCP window scale option is needed for efficient transfer of data when the bandwidth-delay product (BDP) is greater than 64 KB [1].For instance, if a T1 transmission line of 1.5 Mbit/s was used over a satellite link with a 513 millisecond round-trip time (RTT), the bandwidth-delay product is ,, =, bits or about 96,187 bytes.
It is a receiver-side algorithm that employs a loss-based approach using a novel mechanism, called agility factor (AF). to increase the bandwidth utilization over high-speed and short-distance networks (low bandwidth-delay product networks) such as local area networks or fiber-optic network, especially when the applied buffer size is small. [26]
Although HDLC framing has an overhead of <1% in the average case, it suffers from a very poor worst-case overhead of 100%; for inputs that consist entirely of bytes that require escaping, HDLC byte stuffing will double the size of the input. The COBS algorithm, on the other hand, tightly bounds the worst-case overhead.
A block of data of size 2 (n+1) − 1 always has one sub-block of size 2 n aligned on 2 n bytes. This is how a dynamic allocator that has no knowledge of alignment, can be used to provide aligned buffers, at the price of a factor two in space loss.
The Video Buffering Verifier (VBV) is a theoretical MPEG video buffer model, used to ensure that an encoded video stream can be correctly buffered, and played back at the decoder device. By definition, the VBV shall not overflow nor underflow when its input is a compliant stream, (except in the case of low_delay).
The packet transmission time in seconds can be obtained from the packet size in bit and the bit rate in bit/s as: Packet transmission time = Packet size / Bit rate. Example: Assuming 100 Mbit/s Ethernet, and the maximum packet size of 1526 bytes, results in Maximum packet transmission time = 1526×8 bit / (100 × 10 6 bit/s) ≈ 122 μs
A bloated buffer has an effect only when this buffer is actually used. In other words, oversized buffers have a damaging effect only when the link they buffer becomes a bottleneck. The size of the buffer serving a bottleneck can be measured using the ping utility provided by most operating systems. First, the other host should be pinged ...