Search results
Results from the WOW.Com Content Network
Color 6 is treated specially; normally, color 6 would become dark yellow, as seen to the left, but in order to achieve a more pleasing brown tone, special circuitry in most RGBI monitors, starting with the IBM 5153 color display, [11] makes an exception for color 6 and changes its hue from dark yellow to brown by reducing the analogue green ...
The Atari ST series has a digital-to-analog converter of 3-bits, eight levels per RGB channel, featuring a 9-bit RGB palette (512 colors).Depending on the (proprietary) monitor type attached, it displays one of the 320×200, 16-colors and 640×200, 4-colors modes with the color monitor, or the high resolution 640×400 black and white mode with the monochrome monitor.
Mode 5 is intended mainly for a monochrome composite video monitor, but because of a specific intentional feature of the CGA hardware, it also has a different palette for an RGBI color monitor. For mode 4, two palettes can be chosen: green/red/brown and cyan/magenta/white; the difference is the absence or presence of the blue signal in all ...
Color calibration of a monitor using ColorHug2, an open source colorimeter, placed on the screen. For calibrating the monitor a colorimeter is attached flat to the display's surface, shielded from all ambient light. The calibration software sends a series of color signals to the display and compares the values that were actually sent against ...
This is generally the native resolution—with, therefore, square pixels—of standard 17" and 19" LCD monitors. It was often a recommended resolution for 17" and 19" CRTs also, though as they were usually produced in a 4:3 aspect ratio, it either gave non-square pixels or required adjustment to show small vertical borders at each side of the ...
Pausing the video shows that the perceived color of the bottom-right square during playback is different from the color seen in any individual frame. In an LCD display that uses FRC the colors that are alternated between would be more similar than those in the demonstration video, further reducing the flicker effect.
VGA section on the motherboard in IBM PS/55. The color palette random access memory (RAM) and its corresponding digital-to-analog converter (DAC) were integrated into one chip (the RAMDAC) and the cathode-ray tube controller was integrated into a main VGA chip, which eliminated several other chips in previous graphics adapters, so VGA only additionally required external video RAM and timing ...
Image adjustment Various general commands such as display orientation, degauss, gamma, zoom, focus, brightness/contrast, backlight control, etc. [a] It is possible to select the input source using a VCP command. Some monitors will only take VCP commands from the active input source, others will take commands from any connected input source.