Search results
Results from the WOW.Com Content Network
Nordic Gold, composed of 89% copper, 5% aluminium, 5% zinc, and 1% tin, is a more recently developed aluminium-bronze alloy for coinage. It was first used for the Swedish 10-kronor coin in 1991, and became widespread after the introduction of Nordic gold 10, 20 and 50-cent Euro coins in 2002.
Aluminium brass is a technically rather uncommon term for high-strength and partly seawater-resistant copper-zinc cast and wrought alloys with 55–66% copper, up to 7% aluminium, up to 4.5% iron, and 5% manganese. Aluminium bronze is technically correct as bronze, a zinc-free copper-tin casting alloy with aluminium content.
Bronze is an alloy consisting primarily of copper, commonly with about 12–12.5% tin and often with the addition of other metals (including aluminium, manganese, nickel, or zinc) and sometimes non-metals (such as phosphorus) or metalloids (such as arsenic or silicon).
A bronze is an alloy of copper and other metals, most often tin, but also aluminium and silicon. Aluminium bronzes are alloys of copper and aluminium. The content of aluminium ranges mostly between 5% and 11%. Iron, nickel, manganese and silicon are sometimes added.
Although aluminium is unlikely to be adsorbed into the blood stream, its inhalation can cause severe irritation and hinder the ventilation mechanism. [9] High levels of exposure over many years may result in aluminosis which causes pulmonary fibrosis. [10] Aluminium powder and dust is highly flammable and creates a significant risk of fire or ...
Aluminium–copper alloys (AlCu) are aluminium alloys that consist largely of aluminium (Al) and traces of copper (Cu) as the main alloying elements. Important grades also contain additives of magnesium , iron , nickel and silicon ( AlCu(Mg, Fe, Ni, Si) ), often manganese is also included to increase strength (see aluminium-manganese alloys ).
Aluminium-silicon alloys typically contain 3% to 25% silicon content. [1] Casting is the primary use of aluminum-silicon alloys, but they can also be utilized in rapid solidification processes and powder metallurgy. Alloys used by powder metallurgy, rather than casting, may contain even more silicon, up to 50%. [1]
Aluminium granules have been found safer and economical compared to atomized aluminium powder. Aluminium granules have lower explosion risk in production and in use ...