Search results
Results from the WOW.Com Content Network
In ISA temperature conditions the altimeter will read the height above the airfield/runway in the vicinity of the airfield. SPS/STD - 'Standard Pressure Setting' or just 'Standard' refers to the altimeter being set to the standard pressure of 1013.25 hPa. It is the setting that causes an altimeter to read the aircraft's flight level (FL).
Pilots can perform preflight altimeter checks by setting the barometric scale to the current reported altimeter setting. The altimeter pointers should indicate the surveyed field elevation of the airport. [10] Federal Aviation Administration requires that if the indication is off by more than 75 ft (23 m) from the surveyed field elevation, the ...
It indicates altitude obtained when an altimeter is set to an agreed baseline pressure under certain circumstances in which the aircraft’s altimeter would be unable to give a useful altitude readout. Examples would be landing at a high altitude or near sea level under conditions of exceptionally high air pressure.
An altimeter or an altitude meter is an instrument used to measure the altitude of an object above a fixed level. [1] The measurement of altitude is called altimetry , which is related to the term bathymetry , the measurement of depth under water.
The altimeter setting used is the ISA sea level pressure of 1013 hPa or 29.92 inHg. The actual surface pressure will vary from this at different locations and times. Therefore, by using a standard pressure setting, every aircraft has the same altimeter setting, and vertical clearance can be maintained during cruise flight. [1]
In aviation, atmospheric sciences and broadcasting, a height above ground level (AGL [1] or HAGL) is a height measured with respect to the underlying ground surface.This is as opposed to height above mean sea level (AMSL or HAMSL), height above ellipsoid (HAE, as reported by a GPS receiver), or height above average terrain (AAT or HAAT, in broadcast engineering).
When flying at a flight level, the altimeter is always set to standard pressure (29.92 inHg or 1013.25 hPa). On the flight deck, the definitive instrument for measuring altitude is the pressure altimeter, which is an aneroid barometer with a front face indicating distance (feet or metres) instead of atmospheric pressure.
Altimeter setting is calculated based on barometric pressure, site elevation, sensor elevation and - optionally - air temperature. Altimeter setting is reported in inches of mercury (in steps of 0.01 inHg) or whole hectopascals, rounded down. ASOS heated tipping bucket precipitation gauge