Ads
related to: adding coolant directly to radiator heater tank
Search results
Results from the WOW.Com Content Network
a radiator, consisting of many small tubes equipped with a honeycomb of fins to dissipate heat rapidly, that receives and cools hot liquid from the engine; a water pump, usually of the centrifugal type, to circulate the coolant through the system; a thermostat to control temperature by varying the amount of coolant going to the radiator;
Only the fixed parts of the engine, such as the block and head, are cooled directly by the main coolant system. Moving parts such as the pistons, and to a lesser extent the crankshaft and connecting rods, must rely on the lubrication oil as a coolant, or to a very limited amount of conduction into the block and thence the main coolant. High ...
The hot coolant is then fed into the inlet tank of the radiator (located either on the top of the radiator, or along one side), from which it is distributed across the radiator core through tubes to another tank on the opposite end of the radiator. As the coolant passes through the radiator tubes on its way to the opposite tank, it transfers ...
Expansion tank in a 1987 Saab 90 (brown plastic tank with white lid at top of picture) An expansion tank, also known as "overflow bottle", is also used in the cooling system of most internal combustion engines, to allow the coolant, such as antifreeze, and the air in the system to expand with rising temperature and pressure. The tank is also ...
Because the heater core cools the heated coolant from the engine by transferring its heat to the cabin air, it can also act as an auxiliary radiator for the engine. If the radiator is working improperly, the operator may turn the heat on (together with the cabin blower fan placed on full speed, and with the windows opened) in the passenger ...
Proper engine coolant and a pressurized coolant system obviate these shortcomings of water. With proper antifreeze, a wide temperature range can be tolerated by the engine coolant, such as −34 °F (−37 °C) to +265 °F (129 °C) for 50% (by volume) propylene glycol diluted with distilled water and a 15 psi pressurized coolant system.
Engine oil heater attached to the engine's oil pan with magnets. Engine oil heater inserted into the dipstick tube. In-line coolant heaters, which are installed into a radiator hose to warm the coolant (sometimes with a circulation pump to increase its effectiveness). Electric blankets that are laid over the top of the engine.
In a steam heating system, each room is equipped with a radiator which is connected to a source of low-pressure steam (a boiler). Steam entering the radiator condenses and gives up its latent heat, returning to liquid water. The radiator in turn heats the air of the room, and provides some direct radiant heat. The condensate water returns to ...
Ads
related to: adding coolant directly to radiator heater tank