Search results
Results from the WOW.Com Content Network
HDMI connector plugs (male): Type D (Micro), Type C (Mini), and Type A. High-Definition Multimedia Interface (HDMI) High definition digital video devices (HDMI protocol) Electrically compatible with DVI-D and DVI-I, but not DVI-A, using a simple adapter.
The BNC connector is used for analog composite video and digital video interconnects on commercial video devices. Consumer electronics devices with RCA connector jacks can be used with BNC-only commercial video equipment by inserting an adapter. BNC connectors were commonly used on 10base2 thin Ethernet network cables and network cards. BNC ...
The various serial digital interface standards all use (one or more) coaxial cables with BNC connectors, with a nominal impedance of 75 ohms. This is the same type of cable used in analog composite video setups, which potentially makes for easier "drop in" equipment upgrades (though may be necessary for long runs at the higher bitrates for older oxidising or lower grade of cable to replaced ...
HDMI Type A socket. High-Definition Multimedia Interface (HDMI) is a compact audio/video standard for transmitting uncompressed digital data. There are three HDMI connector types. Type A and Type B were defined by the HDMI 1.0 specification. Type C was defined by the HDMI 1.3 specification.
Devices are available to convert from composite to other standards such as analog VGA or digital HDMI; such devices may be called upscalers or scan converters, although not all devices with these names will handle composite input. A converter with electronics is necessary; a simple cable will not do the job.
Composite video is an baseband analog video format that typically carries a 405, 525 or 625 line interlaced black and white or color signal, on a single channel, unlike the higher-quality S-Video (two channels) and the even higher-quality YPbPr (three channels).
A passive DVI-to-VGA adapter. This adapter will not work with a DVI-D output. It requires a DVI-I or DVI-A output to get the analog signal to a VGA input (even if the adapter looks like a DVI-D). A more expensive active adapter (or converter) is required to connect DVI-D to VGA.
The original connector for CoaXPress is a 75 Ω IEC 61169-8 BNC connector. The smaller DIN 1.0/2.3 connector was added in CoaXPress 1.1, and the Micro-BNC connector was then added to CoaXPress 2.0 for the new speeds faster than CXP-6. Most of recent camera and framegrabber products use either DIN 1.0/2.3 or Micro-BNC connectors and the IEC ...