Search results
Results from the WOW.Com Content Network
External dimensions are similar to a THM350 with a 9-inch tailhousing found in Chevrolet/GMC long wheelbase truck/vans and 1971-76 B-bodies (Bel Air, Impala, Caprice). Transmission fluid cooler lines on the 700R4 the bottom fitting on the right side of the transmission is the "out" line to the cooler and the top fitting is for the return line ...
GM's Automatic Safety Transmission (AST) was a semi-automatic transmission released in 1937. The first mass-produced fully-automatic transmission developed for passenger automobile use was the GM Hydramatic introduced in 1940. [1]
Also called the GM small corporate pattern and the S10 pattern. This pattern has a distinctive odd-sided hexagonal shape. Rear wheel drive applications have the starter mounted on the right side of the block (when viewed from the flywheel) and on the opposite side of the block compared to front wheel drive installations.
A Hydra-Matic 4L80 transmission at the Ypsilanti Automotive Heritage Museum. The 4L80-E (RPO MT1) is rated to handle engines with up to 440 ft·lbf (597 N·m) of torque. [2]
Turbo-Hydramatic 425 (TH425 or THM 425, [1] later 325) was an automatic transmission developed and produced by General Motors.The THM425 was a derivative of the THM400; most parts directly interchange and some others will interchange with minor modifications.
This was a later model of the 125 that debuted for 1982 and included a torque converter clutch or TCC. The TCC acts similar to a clutch in a manual transmission vehicle, in that at speeds above 35 MPH a combination of engine vacuum- and temperature-sensing valves, and a dedicated brake switch - and in later models an ECU - activated a solenoid which engaged a clutch physically locking the ...
In addition to 3,000-shp output, the targets for AATE were a 25% reduction in fuel consumption (less than 0.347 lb/(hp⋅h), 211 g/kWh), a 65% improvement in power to weight (more than 6.5 hp/lb, 10.7 kW/kg), a 20% improvement in design life (more than 6000 hours and 15000 cycles), a 35% reduction in production (less than $650k per engine) and maintenance cost, and a 15% reduction in product ...
The Super Turbine 300 (abbreviated ST-300) [1] [2] was a two-speed automatic transmission built by General Motors.It was used in various Buick, Oldsmobile, and Pontiac models from 1964-1969.