Search results
Results from the WOW.Com Content Network
The first ACOG model, known as the TA01, was released in 1987. [3] [4] An example was tested on the Stoner 93 in the early 1990s by the Royal Thai Armed Forces. [5]In 1995, United States Special Operations Command selected the 4×32 TA01 as the official scope for the M4 carbine and purchased 12,000 units from Trijicon. [6]
The metal body of the PSO-1 is made from a magnesium alloy. The PSO-1 features a battery-powered red illuminated reticle with light provided by a simple diode bulb. It features professionally ground, fully multi-coated optical elements, a baked enamel finish for scratch protection, and an attached, quick-deployable, extendable sunshade.
The FN FAL from which the L1A1 Self-Loading Rifle was derived was not designed for mounting optical sights like the SUIT. To mount the SUIT, a new top cover was designed. This had a rail welded to the top to accept the sight mount, and two tabs at the rear of the pressed sheet steel cover which butted against the back of the upper receiver, preventing the cover from sliding on its rails and ...
The optic has two standard reticles: both are a cross, feature a range finder out to 600 m (656 yd) for 5.56x45 and 800 m (875 yd) for 7.62x51, where they differ is in the bulletdrop design, where the one called CX5395/CX5396 uses circles to denote the range, while the other called CX5455/CX5456 uses lines and also features lines for windage.
Both AN/PAS-13Bs have programmable reticles, allowing the user to match the reticle to the weapon system the sight will be mounted on. Some reticles included in the sight include those designed for the M16 rifle , M4 carbine , M60 machine gun , M240 machine gun , M249 , M2 machine gun , MK19 , MK47 , M24 sniper weapon system , and the GAU-21 .
The Sight Unit Small Arms, Trilux, or SUSAT, is a 4× telescopic sight, with tritium-powered illumination utilised at dusk or dawn. The full name of the current model is the SUSAT L9A1 . The sight is not designed as a sniper sight, but is rather intended to be mounted on a variety of rifles and to be used by all infantrymen.
Using an LED as a reticle is an innovation that greatly improves the reliability and general usefulness of the sight: there is no need for other optical elements to focus light behind a reticle; the mirror can use a dichroic coating to reflect just the red spectrum, passing through most other light; and the LED itself is solid state and ...
C79 Reticle as shown in the declassified danish manual of arms HRN 111-00 for the M95 family of rifles (C7,C8 and C8IUR) The reticle of the C79 sight was designed to serve on the C9 Light Machine Gun, thus an appropriate pattern was chosen to aid the gunner in judging distance.