Search results
Results from the WOW.Com Content Network
Foundation crack injections are used when poured concrete foundations crack, either from settlement or the expansion and contraction of the concrete. Epoxy crack injections are typically used for structural purposes while hydrophobic or hydrophilic polyurethane injections are used to seal cracks to prevent penetration of moisture or water.
Water loss at this stage aggravates concrete shrinkage and can cause unacceptable cracks to develop in concrete. Cracks form in case of a too short, or too poor, curing when young concrete has not yet developed a sufficient early strength to withstand tensile stress caused by undesirable and premature drying.
DPC visible between concrete foundation and brickwork. Damp proofing is defined by the American Society for Testing and Materials (ASTM) as a material that resists the passage of water with no hydrostatic pressure. [1] Waterproof is defined by the ASTM as a treatment that resists the passage of water under pressure. [1]
Water will often penetrate the outer envelope of a building and appear inside. Common defects include: Roof defects such as faulty flashing, cracked or missing slates or tiles. Faults in the brickwork or masonry such as missing or cracked pointing. Porous bricks or stones. Missing or defective mastic around windows and doors. Blocked weep holes.
Masonry walls are built with a damp-proof course to prevent rising damp, and the concrete in foundations needs to be damp-proofed or waterproofed with a liquid coating, basement waterproofing membrane (even under the concrete slab floor where polyethylene sheeting is commonly used), or an additive to the concrete.
Concrete sealers are applied to concrete to protect it from surface damage, corrosion, and staining. They either block the pores in the concrete to reduce absorption of water and salts or form an impermeable layer which prevents such materials from passing.
Workers hurriedly tried to shore up a rural Utah dam after a 60-foot (18-meter) crack sent water pouring into a creek and endangering the 1,800 residents of a downstream town. “I can’t say ...
Typical crack pattern of the alkali-silica reaction (ASR). The gel exudations through the concrete cracks have a characteristic yellow color and a high pH. The fatty aspect of the exudations imbibing the concrete porosity along the cracks is also a distinctive feature of ASR. The alkali-silica reaction as a chemical cycle process