Search results
Results from the WOW.Com Content Network
Dual-channel memory slots, color-coded orange and yellow for this particular motherboard. Dual-channel-enabled memory controllers in a PC system architecture use two 64-bit data channels. Dual-channel should not be confused with double data rate (DDR), in which data exchange happens twice per DRAM clock. The two technologies are independent of ...
Moreover, if a mainboard has a dual-or quad-channel memory subsystem, all of the memory channels must be upgraded simultaneously. 16-bit modules provide one channel of memory, while 32-bit modules provide two channels. Therefore, a dual-channel mainboard accepting 16-bit modules must have RIMMs added or removed in pairs.
A memory controller, also known as memory chip controller (MCC) or a memory controller unit (MCU), is a digital circuit that manages the flow of data going to and from a computer's main memory. [ 1 ] [ 2 ] When a memory controller is integrated into another chip, such as an integral part of a microprocessor , it is usually called an integrated ...
The Intel 850 supports 16bit RIMM of PC600 or PC800, and the memory bandwidth reached 3,2 GB/s when using PC800 RIMM (Rambus Inline Memory Module). This is three times the memory bandwidth of 1,06 GB/s of PC133 SDRAM, which was the mainstream in the previous generation, and matches the bandwidth of 3,2 GB/s of FSB of QDR 400MHz adopted in ...
A DIMM (Dual In-Line Memory Module) is a popular type of memory module used in computers. It is a printed circuit board with one or both sides (front and back) holding DRAM chips and pins . [ 1 ] The vast majority of DIMMs are manufactured in compliance with JEDEC memory standards , although there are proprietary DIMMs.
For compatibility, the lower four DMA channels were still limited to 8-bit transfers only, and whilst memory-to-memory transfers were now technically possible due to the freeing up of channel 0 from having to handle DRAM refresh, from a practical standpoint they were of limited value because of the controller's consequent low throughput ...
DDR memory bus width per channel is 64 bits (72 for ECC memory). Total module bit width is a product of bits per chip and number of chips. It also equals number of ranks (rows) multiplied by DDR memory bus width. Consequently, a module with a greater number of chips or using ×8 chips instead of ×4 will have more ranks.
The first use of channel I/O was with the IBM 709 [2] vacuum tube mainframe in 1957, whose Model 766 Data Synchronizer was the first channel controller. The 709's transistorized successor, the IBM 7090, [3] had two to eight 6-bit channels (the 7607) and a channel multiplexor (the 7606) which could control up to eight channels.