Search results
Results from the WOW.Com Content Network
Natural gas companies in Europe, Australia, and South America have adopted 15 °C (59 °F) and 101.325 kPa (14.696 psi) as their standard gas volume reference conditions, used as the base values for defining the standard cubic meter.
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
A natural-gas processing plant in Aderklaa, Austria. Natural-gas processing is a range of industrial processes designed to purify raw natural gas by removing contaminants such as solids, water, carbon dioxide (CO 2), hydrogen sulfide (H 2 S), mercury and higher molecular mass hydrocarbons to produce pipeline quality dry natural gas [1] for pipeline distribution and final use. [2]
In the United States, the hydrocarbon dew point of processed, pipelined natural gas is related to and characterized by the term GPM which is the gallons of liquefiable hydrocarbons contained in 1,000 cubic feet (28 m 3) of natural gas at a stated temperature and pressure.
Compressed natural gas (CNG) is a fuel gas mainly composed of methane (CH 4), compressed to less than 1% of the volume it occupies at standard atmospheric pressure.It is stored and distributed in hard containers at a pressure of 20–25 megapascals (2,900–3,600 psi; 200–250 bar), usually in cylindrical or spherical shapes.
The raw natural gas from the low pressure separator is sent to a "booster" compressor that raises the gas pressure and sends it through a cooler, and then to the main gas compressor. At the raw natural gas processing plant, the gas will be dehydrated and acid gases and other impurities will be removed from the gas.
For petroleum gases, the standard cubic foot (scf) is defined as one cubic foot of gas at 60 °F (288.7 K; 15.56 °C) and at normal sea level air pressure. The pressure definition differs between sources, but are all close to normal sea level air pressure. A pressure of 14.696 pounds per square inch (1.00000 atm; 101.325 kPa). [2]
Sour gas is natural gas or any other gas containing significant amounts of hydrogen sulfide (H 2 S).. Natural gas is usually considered sour if there are more than 5.7 milligrams of H 2 S per cubic meter of natural gas, which is equivalent to approximately 4 ppm by volume under standard temperature and pressure.