Search results
Results from the WOW.Com Content Network
Monel alloy 405, also known as Monel R405, is the free-machining grade of alloy 400. [26] The nickel, carbon, manganese, iron, silicon & copper percent remains the same as alloy 400, but the sulfur is increased from 0.024 max to 0.025-0.060%. Alloy 405 is used chiefly for automatic screw machine stock and is not generally recommended for other ...
Waspaloy is an age-hardenable, nickel-based superalloy with excellent strength properties through temperatures of roughly 980°C (1800°F). Other characteristics of Waspaloy include good corrosion resistance, as well as being relatively impervious to oxidation making it well suited for service in extreme environments.
Working at Inco-Mond's Wiggin facility at Birmingham in the United Kingdom, Leonard Bessemer Pfeil is credited with the development of Nimonic alloy 80 in 1941, and used in the Power Jets W.2B. Four years later, Nimonic alloy 80A followed, an alloy widely used in engine valves today. Progressively stronger alloys were subsequently developed ...
In Europe, shock steels often contain 0.5–0.6% carbon and around 3% nickel. A range of 1.75% to 2.75% nickel is still used in some shock-resisting and high-strength low-alloy steels (HSLA), such as L6, 4340, and Swedish saw steel, but it is relatively expensive. An example of its use is in the production of jackhammer bits.
Inconel alloys are oxidation- and corrosion-resistant. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminum and steel would succumb to creep as a result of thermally ...
Nickel titanium, also known as nitinol, is a metal alloy of nickel and titanium, where the two elements are present in roughly equal atomic percentages. Different alloys are named according to the weight percentage of nickel; e.g., nitinol 55 and nitinol 60 .
Machinability is the ease with which a metal can be cut permitting the removal of the material with a satisfactory finish at low cost. [1] Materials with good machinability (free machining materials) require little power to cut, can be cut quickly, easily obtain a good finish, and do not cause significant wear on the tooling.
Like other nickel/iron compositions, Invar is a solid solution; that is, it is a single-phase alloy.In one commercial grade called Invar 36 it consists of approximately 36% nickel and 64% iron, [4] has a melting point of 1427C, a density of 8.05 g/cm3 and a resistivity of 8.2 x 10-5 Ω·cm. [5] The invar range was described by Westinghouse scientists in 1961 as "30–45 atom per cent nickel".