Search results
Results from the WOW.Com Content Network
A copper concentric reducer. A concentric reducer is used to join pipe sections or tube sections on the same axis. [1] The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. [1] For example, when a 1" pipe transitions into a 3/4" pipe and the top or bottom of the pipe doesn't need to remain level. [2]
A coupling whose ends use the same connection method but are of different sizes is called a reducing coupling or reducer. An example is a 3/4" NPT to 1/2" NPT coupling. An example is a 3/4" NPT to 1/2" NPT coupling.
Pressure drop in piping is directly proportional to the length of the piping—for example, a pipe with twice the length will have twice the pressure drop, given the same flow rate. [8] Piping fittings (such as elbow and tee joints) generally lead to greater pressure drop than straight pipe. As such, a number of correlations have been developed ...
They are used where the diameter of the pipe on the upstream side of the fitting (i.e. where flow is coming from) is larger than the downstream side, and where there is a danger that vapour may accumulate. [1] Unlike a concentric reducer, which resembles a cone, eccentric reducers have an edge that is parallel to the connecting pipe, referred ...
With all in-line slider-crank mechanisms, the stroke is twice the length of the crank arm. Therefore, given the stroke, the length of the crank arm can be determined. This relationship is represented as: L 2 = (ΔR 4) max ÷ 2. Once L 2 is found, the follower length (L 3) can be determined. However, because the stroke of the mechanism only ...
AOL latest headlines, entertainment, sports, articles for business, health and world news.
The Official Table of Drops, formerly issued by the British Home Office, is a manual which is used to calculate the appropriate length of rope for long drop hangings. Following a series of failed hangings, including those of John Babbacombe Lee , a committee chaired by Henry Bruce, 1st Baron Aberdare was formed in 1886 to discover and report on ...
In mechanical engineering, backlash, sometimes called lash, play, or slop, is a clearance or lost motion in a mechanism caused by gaps between the parts. It can be defined as "the maximum distance or angle through which any part of a mechanical system may be moved in one direction without applying appreciable force or motion to the next part in mechanical sequence."