Search results
Results from the WOW.Com Content Network
The most common usage is the DB25, using TASCAM's pinout (now standardised in AES59 by the Audio Engineering Society [1]). To avoid the possibility of bent pins on fixed equipment, the male connector is generally fitted to the cabling and the female connector to the equipment.
For example, DB-25 denotes a D-sub with a 25-position shell size and a 25-position contact configuration. The contacts in each row of these connectors are spaced 326/3000 of an inch apart, or approximately 0.1087 inches (2.76 mm), and the rows are spaced 0.112 inches (2.84 mm) apart; the pins in the two rows are offset by half the distance ...
Currently known as TIA-530-A, but often called EIA-530, or RS-530, is a balanced serial interface standard that generally uses a 25-pin connector, originally created by the Telecommunications Industry Association. Finalized in 1987 (revision A finalized in 1992 [1]), the specification defines the cable between the DTE and DCE devices.
Another common connector is a 10 × 2 pin header common on motherboards and add-in cards which is usually converted via a ribbon cable to the more standard 9-pin DE-9 connector (and frequently mounted on a free slot plate or other part of the housing).
Pin No (DB25) Pin No (36 pin) Signal name Direction Register - bit Inverted 1 1 Strobe In/out Control-0 Yes 2 2 Data0 Out Data-0 No 3 3 Data1 Out Data-1 No 4 4 Data2 Out Data-2 No 5 5 Data3 Out Data-3 No 6 6 Data4 Out Data-4 No 7 7 Data5 Out Data-5 No 8 8 Data6 Out Data-6 No 9 9 Data7 Out Data-7 No 10 10 Ack In Status-6 No 11 11 Busy In Status-7
Male pinout of a 25-pin serial port (D-subminiature, DB-25) commonly found on 1980s computers. The following table lists commonly used RS-232 signals (called "circuits" in the specifications) and their pin assignments on the recommended DB-25 connectors [14] (see Serial port pinouts for other commonly used connectors not defined by the standard).
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
This is because the TDIF-1 spec was derived from the digital audio transmitter of the NEC uPD6381 DSP used in the DA-88. The TDIF-1 Version 1.1 specification includes parity and other channel information bits. TDIF-1 Version 2.0 includes specification for double speed and quad speed (e.g. 96 kHz and 192 kHz) rates at reduced channel counts. [3]