enow.com Web Search

  1. Ads

    related to: alternative to boiled linseed oil for wood

Search results

  1. Results from the WOW.Com Content Network
  2. Finishing oil - Wikipedia

    en.wikipedia.org/wiki/Finishing_oil

    Old linseed oil finishes yellow with age, owing to oxidation with the air. Linseed oil was also widely used for the production of oilcloth, a waterproof covering and rainwear material, formed by coating linen or cotton fabrics with the boiled oil. [1] Tung oil is pressed from the nuts of the tung tree. Raw tung cures better than raw linseed and ...

  3. Linseed oil - Wikipedia

    en.wikipedia.org/wiki/Linseed_oil

    Linseed oil, also known as flaxseed oil or flax oil (in its edible form), is a colorless to yellowish oil obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The oil is obtained by pressing , sometimes followed by solvent extraction .

  4. Wood finishing - Wikipedia

    en.wikipedia.org/wiki/Wood_finishing

    Boiled linseed oil: Yellow warm glow, pops grain 1, darkens with age Low Low Relatively safe once cured, metallic driers are poisonous. Easy. Applied in thin coats with cloth or brush, excess wiped off. Cure time can be long. Difficult. All saturated wood needs to be removed (planing/sanding/scraping) Cures matte Tung oil

  5. Wood preservation - Wikipedia

    en.wikipedia.org/wiki/Wood_preservation

    Tung oil has been used for hundreds of years in China, where it was used as a preservative for wood ships. The oil penetrates the wood, and then hardens to form an impermeable hydrophobic layer up to 5 mm into the wood. As a preservative it is effective for exterior work above and below ground, but the thin layer makes it less useful in practice.

  6. Pine tar - Wikipedia

    en.wikipedia.org/wiki/Pine_tar

    Pine tar is combined with gum turpentine and boiled linseed oil to create a wood preservative. First, a thin coat is applied using a mixture with a greater proportion of turpentine. This allows it to permeate deeper into the oakum and fibre of the wood and lets the tar seep into any pinholes and larger gaps that might be in the planks. The tar ...

  7. French polish - Wikipedia

    en.wikipedia.org/wiki/French_polish

    Typically, softer/ thinner oils such as mineral oil will produce a glossier though less durable finish whereas harder/ more viscous oils such as walnut oil and olive oil will produce a more durable finish. Although boiled linseed oil is commonly used as a wood treatment, it is too viscous to use for French polishing [citation needed].

  1. Ads

    related to: alternative to boiled linseed oil for wood