Ad
related to: esb charge map for 12 pin power supply plug sizes
Search results
Results from the WOW.Com Content Network
Generic plugs are often named for the pin diameter they are designed to take. Many non-proprietary co-axial power plugs are 5.5 mm (0.22 in) in outside diameter (OD) and 9.5 mm (0.37 in) in length. Two pin sizes are standard in the jacks for this size plug body, 2.1 mm (0.083 in) and 2.5 mm (0.098 in), and the plugs should match.
Comparison of (L to R) two Powerlet plugs, one combination plug, and one Cigar Lighter Plug. ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between 12 and 24 V DC at up to 12 amps to appliances in vehicles.
The Micro-A connector is 6.85 by 1.8 mm (0.270 by 0.071 in) with a maximum plug body size of 11.7 by 8.5 mm (0.46 by 0.33 in), while the Micro-B connector has the same height and width with a slightly smaller maximum plug body size of 10.6 by 8.5 mm (0.42 by 0.33 in). [9]
From left: IEC Type 1/SAE J1772 inlet; Tesla NACS outlet; IEC Type 2 connector outlet IEC 62196 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles is a series of international standards that define requirements and tests for plugs, socket-outlets, vehicle connectors and vehicle inlets for conductive charging of electric vehicles and is ...
The Type 2 connector has a maximum power output for 43 kW and can handle both single-, dual- and three-phase AC power. The IEC 62196-2 Type 1 connector (codified under SAE J1772) is the corresponding standard for single-phase AC charging in the United States, Canada, and South Korea. [12] J1772 has a maximum output of 19.2 kW. [13]
Power is generally supplied by a plug to a receptacle. Cables are available with one in-line receptacle fanning out to a number of plugs, so that many devices may be supplied by one supply. As the use of a plug implies a cable, even a short stub, some power supplies carry panel-mounted receptacles instead to avoid this cable.
Like in most European plugs, the power pins of Danish plugs are 19 mm (0.75 in) long and spaced 19 mm (0.75 in) apart, with a diameter of 4.8 mm (0.19 in). The earthing pin is part of the plug (in contrast to French and Schuko plugs); it is D-shaped, 14 mm (0.55 in) long, and offset from the power pins by 13 mm (0.51 in).
NEMA 1-15P (two-pole, no ground) and NEMA 5-15P (two-pole with ground pin) plugs are used on common domestic electrical equipment, and NEMA 5-15R is the standard 15-ampere electric receptacle (outlet) found in the United States, and under relevant national standards, in Canada (CSA C22.2 No. 42 [1]), Mexico (NMX-J-163-ANCE) and Japan (JIS C 8303).
Ad
related to: esb charge map for 12 pin power supply plug sizes