Search results
Results from the WOW.Com Content Network
Aside from the belt/chain itself, also common is a failure of the tensioner, and/or the various gear and idler bearings, causing the belt/chain to derail. Furthermore, in engines where the timing belt drives the water pump, failure of the water pump can cause the pump to seize, which can break the timing belt or chain.
A three-row chain replaced the timing belt of the 3.5 liter engine, and the 2.7 in the LX also has electronic throttle control and an enhancement to the intake manifold (described in greater detail below), the former to allow for the use of electronic stability control.
The Jaguar AJ-V6 engine is a piston engine based on the Ford Duratec V6 engine. [2] The Duratec V6 was originally a Porsche design, purchased by the Ford Motor Company with Cosworth finishing the engineering to suit Ford's needs. One notable addition is the use of variable valve timing, a feature also shared with Mazda's version of the engine ...
The single overhead cam V6 engine introduced in 1993. It was derived from Chrysler's first homegrown front-wheel drive V6, the Chrysler 3.3 engine. The SOHC V6 has been replaced by the Chrysler Pentastar engine. There are three major variants of this basic design: the 3.5 L, 3.2 L, and 4.0 L. Additionally, a 2.7 L DOHC version was developed.
The M276 also includes direct injection with piezo–electrically controlled injectors for 2 to 3 sprays per intake stroke in normal operation, [3] multi–spark ignition that creates up to 4 sparks per cycle, [3] and the demand–controlled fuel pump, water pump, oil pump and alternator [3] that reduce parasitic loads.
The Toyota GR engine family is a gasoline, open-deck, piston V6 engine series. The GR series has a 60° die-cast aluminium block and aluminium DOHC cylinder heads.This engine series also features 4 valves per cylinder, forged steel connecting rods and crankshaft, one-piece cast camshafts, a timing chain, [1] and a cast aluminium lower intake manifold.
The 2.5-litre 6G73 is a 24-valve SOHC design with two valves running off a single cam lobe on the exhaust valves using a forked rocker arm and each intake valve actuated with two cam lobes, with a smaller bore than the 3.0L version of the same block. Bore and stroke are 83.5 mm × 76 mm (3.29 in × 2.99 in); it is a 60-degree V6 and weighs ...
The Duratec 2.5 L aka Mondeo V6 not the four cylinder (L5VE with joint Mazda 2.5) DOHC 24 valve engine had 170 hp (127 kW) at 6,250 rpm and 165 lb⋅ft (224 N⋅m) of torque at 4250 rpm. Used in the Ford Mondeo Mk 3 and last generation Ford/Mercury Cougar (1999-2002). The Displacement of the 2.5 L VE was decreased from 2.5 to 2.5 L (2,544 to ...