Search results
Results from the WOW.Com Content Network
Sewage sludge is the residual, semi-solid material that is produced as a by-product during sewage treatment of industrial or municipal wastewater. The term "septage" also refers to sludge from simple wastewater treatment but is connected to simple on-site sanitation systems, such as septic tanks.
The term sewage treatment plant (STP) (or sewage treatment works) is nowadays often replaced with the term wastewater treatment plant (WWTP). [7] [8] Strictly speaking, the latter is a broader term that can also refer to industrial wastewater treatment. The terms water recycling center or water reclamation plants are also in use as synonyms.
Sewage sludge can be superheated and converted it into pelletized granules that are high in nitrogen and other organic materials. In New York City, for example, several sewage treatment plants have dewatering facilities that use large centrifuges along with the addition of chemicals such as polymer to further remove liquid from the sludge. The ...
One common process in wastewater treatment is phase separation, such as sedimentation. Biological and chemical processes such as oxidation are another example. Polishing is also an example. The main by-product from wastewater treatment plants is a type of sludge that is usually treated in the same or another wastewater treatment plant. [2]:
Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment.
TSS of a water or wastewater sample is determined by pouring a carefully measured volume of water (typically one litre; but less if the particulate density is high, or as much as two or three litres for very clean water) through a pre-weighed filter of a specified pore size, then weighing the filter again after the drying process that removes all water on the filter.
This could include any solids, slime solids or liquid slurry residue generated during the treatment of domestic wastewater including, scum and solids removed during primary, secondary or advanced treatment processes. [6] Materials that do not conform to the regulatory definition of "biosolids" can be given alternative terms like "wastewater ...
At the POTW, harmful pollutants in domestic sewage, called conventional pollutants, are removed from the sewage and then the treated effluent is discharged into a surface water body. [38] The removed solids constitute sewage sludge, which typically receive further treatment prior to final disposal on land. (See Sewage sludge treatment.) POTWs ...