Search results
Results from the WOW.Com Content Network
On sandy loam soils, the infiltration rate under a litter cover can be nine times higher than on bare surfaces. The low rate of infiltration in bare areas is due mostly to the presence of a soil crust or surface seal. Infiltration through the base of a tuft is rapid and the tufts funnel water toward their own roots. [6]
These soils have a moderate rate of water transmission (final infiltration rate of 0.15–0.30 in (3.8–7.6 mm) per hour). HSG Group C: Soils with slow infiltration rates when thoroughly wetted. These consist chiefly of soils with a layer that impedes downward movement of water or soils with moderately fine to fine textures.
Soil texture determines total volume of the smallest pores; [56] clay soils have smaller pores, but more total pore space than sands, [57] despite a much lower permeability. [58] Soil structure has a strong influence on the larger pores that affect soil aeration, water infiltration and drainage. [59]
Most soils have a dry bulk density between 1.0 and 1.6 g/cm 3 but organic soil and some porous clays may have a dry bulk density well below 1 g/cm 3. Core samples are taken by pushing a metallic cutting edge into the soil at the desired depth or soil horizon. The soil samples are then oven dried (often at 105 °C) until constant weight.
Soil temperature. Warm soils take in water faster while frozen soils such as permafrost may not be able to absorb depending on the type of freezing. [37] Water infiltration rates range from 0.25 cm per hour for high clay soils to 2.5 cm per hour for sand and well stabilized and aggregated soil structures. [38]
A percolation test (colloquially called a perc test) is a test to determine the water absorption rate of soil (that is, its capacity for percolation) in preparation for the building of a septic drain field (leach field) or infiltration basin. [1] The results of a percolation test are required to design a septic system properly.
During the next rainfall event, the infiltration capacity will cause the soil to be saturated at a different rate. The higher the level of antecedent soil moisture, the more quickly the soil becomes saturated. Once the soil is saturated, runoff occurs. Therefore, surface runoff is a significantly factor in the controlling of soil moisture after ...
An infiltration basin (or recharge basin) is a form of engineered sump [1] or percolation pond [2] that is used to manage stormwater runoff, prevent flooding and downstream erosion, and improve water quality in an adjacent river, stream, lake or bay.