Search results
Results from the WOW.Com Content Network
MemTest86 and Memtest86+ are memory test software programs designed to test and stress test an x86 architecture computer's random-access memory (RAM) for errors, by writing test patterns to most memory addresses, reading back the data, and comparing for errors. [6]
Memory diagnostic software programs (e.g., memtest86) are low-cost or free tools used to check for memory failures on a PC. They are usually in the form of a bootable software distribution on a floppy disk or CD-ROM. The diagnostic tools provide memory test patterns which are able to test all system memory in a computer.
The original IBM PC could be equipped with as little as 16 KB of RAM and typically had between 64 and 640 KB; depending on the amount of equipped memory, the computer's 4.77 MHz 8088 required between 5 seconds and 1.5 minutes to complete the POST and there was no way to skip it.
SoftPerfect RAM Disk can access memory available to Windows, i.e. on 32-bit systems it is limited to the same 4 GB as the 32-bit Windows itself, otherwise for physical memory beyond 4 GB it must be installed on 64-bit Windows. Multiple RAM disks can be created, and these can optionally be made persistent by automatically saving contents to and ...
The Ultimate Boot CD (UBCD) is a bootable CD-ROM containing a collection of diagnostic tools including CPU tests, memory tests, virus scanning, and other tools. [1] [2]The Ultimate Boot CD (UBCD) contains over 100 system diagnostics and hardware troubleshooting utilities.
Microsoft Diagnostics (MSD) was a software tool developed by Microsoft to assist in the diagnostics of 1990s-era computers. Users primarily deployed this tool to provide detailed technical information about the user's software and hardware and to print the gathered information, usually for use by support technicians in troubleshooting and resolving problems.
An option ROM for the PC platform (i.e. the IBM PC and derived successor computer systems) is a piece of firmware that resides in ROM on an expansion card (or stored along with the main system BIOS), which gets executed to initialize the device and (optionally) add support for the device to the BIOS.
The memory capacity of a module can be computed from bytes 4, 7 and 8. The module width (byte 8) divided by the number of bits per chip (byte 7) gives the number of chips per rank. That can then be multiplied by the per-chip capacity (byte 4) and the number of ranks of chips on the module (usually 1 or 2, from byte 7).