Search results
Results from the WOW.Com Content Network
The planar reentry equations are the equations of motion governing the unpowered reentry of a spacecraft, based on the assumptions of planar motion and constant mass, in an Earth-fixed reference frame.
Early reentry-vehicle concepts visualized in shadowgraphs of high speed wind tunnel tests. The concept of the ablative heat shield was described as early as 1920 by Robert Goddard: "In the case of meteors, which enter the atmosphere with speeds as high as 30 miles (48 km) per second, the interior of the meteors remains cold, and the erosion is due, to a large extent, to chipping or cracking of ...
Soyuz TMA reentry capsule after landing, 2005. A reentry capsule is the portion of a space capsule which returns to Earth following a spaceflight. The shape is determined partly by aerodynamics; a capsule is aerodynamically stable falling blunt end first, which allows only the blunt end to require a heat shield for atmospheric entry. A crewed ...
The ballistic coefficient of an atmospheric reentry vehicle has a significant effect on its behavior. A very high ballistic coefficient vehicle would lose velocity very slowly and would impact the Earth's surface at higher speeds. In contrast, a low ballistic coefficient vehicle would reach subsonic speeds before reaching the ground. [75]
The boost phase is the portion of the flight of a ballistic missile or space vehicle during which the booster and sustainer engines operate until it reaches peak velocity. . This phase can take 3 to 4 minutes for a solid rocket (shorter for a liquid-propellant rocket), the altitude at the end of this phase is 150–200 km, and the typical burn-out speed is 7 k
The primary goal was to have the RV change its path during reentry so that anti-ballistic missiles (ABMs) would not be able to track their movements rapidly enough for a successful interception. The first known example was the Alpha Draco tests of 1959, followed by the Boost Glide Reentry Vehicle (BGRV) test series, ASSET [16] and PRIME. [17]
External ballistics or exterior ballistics is the part of ballistics that deals with the behavior of a projectile in flight. The projectile may be powered or un-powered, guided or unguided, spin or fin stabilized, flying through an atmosphere or in the vacuum of space, but most certainly flying under the influence of a gravitational field.
Aerodynamic heating is the heating of a solid body produced by its high-speed passage through air. In science and engineering, an understanding of aerodynamic heating is necessary for predicting the behaviour of meteoroids which enter the Earth's atmosphere, to ensure spacecraft safely survive atmospheric reentry, and for the design of high-speed aircraft and missiles.