Search results
Results from the WOW.Com Content Network
Another function of CTIS is to maintain tire pressure if there is a slow leak or puncture. In this case, the system controls inflation automatically based on the selected pressure the driver has set. [1] CTIS also extends truck, tire, and drive train life, by significantly reducing vibration and shock loading.
The tire is indexed into the test station and placed on the lower chuck. The upper chuck lowers to make contact with the upper bead. The tire is inflated to the set point pressure. The load wheel advances to contact the tire and apply the set loading force. The spindle drive accelerates the tire to the test speed.
A camera unit (sometimes called a "head") is attached to a specially designed clamp which holds on to a wheel. There are usually four camera units in a wheel alignment system (a camera unit for each wheel). The camera units communicate their physical positioning with respect to other camera units to a central computer, which calculates and ...
Driver Information Center in a 2013 Chevrolet Cruze showing TPMS readout. A tire-pressure monitoring system (TPMS) monitors the air pressure inside the pneumatic tires on vehicles. [1] A TPMS reports real-time tire-pressure information to the driver, using either a gauge, a pictogram display, or a simple low-pressure warning light.
In this case the lateral forces at the tire do not act at the center of the contact patch, but at a point behind the center. This distance is called the pneumatic trail and varies with speed, load, steer angle, surface, tire type, tire pressure and time. A good starting point for this is 30 mm behind the center of the contact patch. [citation ...
Mitsubishi's S-AWC logo. S-AWC (Super All Wheel Control) is the brand name of an advanced full-time four-wheel drive system developed by Mitsubishi Motors.The technology, specifically developed for the new 2007 Lancer Evolution, [1] the 2010 Outlander (if equipped), the 2014 Outlander (if equipped), the Outlander PHEV and the Eclipse Cross have an advanced version of Mitsubishi's AWC system.
Like the NP219, this transfer case utilizes a center differential with a viscous coupler to provide smooth and efficient four-wheel drive operation on all surfaces. This system has 4WD All-Time, Neutral, and 4WD Low modes. In normal 4WD All-time mode, the center differential is open and distributes torque to both the front and rear axles.
The diagram below shows the tire from above, so that the road surface lies in the xy-plane. The vehicle to which the tire is attached is moving in the positive y direction. In this example, the vehicle would be cornering to the right (i.e. the positive x direction points to the center of the corner).