Search results
Results from the WOW.Com Content Network
A typical SIM card (mini-SIM with micro-SIM cutout) A SIM card or SIM (Subscriber Identity Module) is an integrated circuit (IC) intended to securely store an international mobile subscriber identity (IMSI) number and its related key, which are used to identify and authenticate subscribers on mobile telephone devices (such as mobile phones and laptops).
Peripheral Component Interconnect (PCI) [3] is a local computer bus for attaching hardware devices in a computer and is part of the PCI Local Bus standard. The PCI bus supports the functions found on a processor bus but in a standardized format that is independent of any given processor's native bus.
The ExpressCard has a maximum throughput of 2.5 Gbit/s through PCI Express and 480 Mbit/s through USB 2.0 dedicated for each slot, while all CardBus and PCI devices connected to a computer usually share a total 1.06 Gbit/s bandwidth. The ExpressCard standard specifies voltages of either 1.5 V or 3.3 V; CardBus slots can use 3.3 V or 5.0 V.
This usage implies a lack of computer savviness, asserting that problems arising when using a device are the fault of the user. Critics of the term argue that the problems are caused instead by poor product designs that fail to anticipate the capabilities and needs of the user. The term can also be used for non-computer-related mistakes.
An eSIM is not removable. An eSIM (embedded SIM) is a form of SIM card that is embedded directly into a device as software installed onto a eUICC chip. First released in March 2016, eSIM is a global specification by the GSMA that enables remote SIM provisioning; end-users can change mobile network operators without the need to physically swap a ...
PC Card is a parallel peripheral interface for laptop computers and PDAs. [1] The PCMCIA originally introduced the 16-bit ISA-based PCMCIA Card in 1990, but renamed it to PC Card in March 1995 to avoid confusion with the name of the organization. [2]
AGP Pro cards will not fit into standard slots, but standard AGP cards will work in a Pro slot. Motherboards equipped with a Universal AGP Pro slot will accept a 1.5 V or 3.3 V card in either the AGP Pro or standard AGP configuration, a Universal AGP card, or a Universal AGP Pro card.
30-pin SIMM, 256 KB capacity Two 30-pin SIMM slots on an IBM PS/2 Model 50 motherboard. Standard sizes: 256 KB, 1 MB, 4 MB, 16 MB. 30-pin SIMMs have 12 address lines, which can provide a total of 24 address bits. With an 8-bit data width, this leads to an absolute maximum capacity of 16 MB for both parity and non-parity modules (the additional redundancy-bit chip usually doe