Search results
Results from the WOW.Com Content Network
As of July 2022: 5 cutters ordered; 10 more optioned; 25 cutters total in program of record [1] [2]. USCGC Argus (WMSM-915) USCGC Chase (WMSM-916) USCGC Ingham (WMSM-917)
The USCG 65' small harbor tug is a class of fifteen tugs used by the United States Coast Guard for search and rescue, law enforcement, aids-to-navigation work and light icebreaking. The tugs are capable of breaking 18 in (0.46 m) of ice with propulsion ahead and 21 in (0.53 m) of ice backing and ramming. [ 2 ]
Also known as a chain shackle, D-shackles are narrow shackles shaped like a loop of chain, usually with a pin or threaded pin closure. D-shackles are very common and most other shackle types are a variation of the D-shackle. The small loop can take high loads primarily in line. Side and racking loads may twist or bend a D-shackle.
All CUCV Is were powered by GM's 6.2 L J-series Detroit Diesel V8 engine non-emissions diesel. [12] These were rated at 155 hp (116 kW) and 240 lb⋅ft (325 N⋅m), which was 5 hp (3.7 kW) more than the emissions diesel engine of the time. They were all equipped with the TH-400 automatic. All but the M1028A1 and M1031 used the NP-208 chain ...
The combustion cycle can be either two-stroke (which results in a lighter engine for a given power output) [3] [4] or four-stroke (which produce lower levels of exhaust gas emissions). [5] [6] The fuel is usually either petrol or diesel. [7] In 1973, a small Wankel (rotary) engine manufactured by NSU was used in a lawn mower. [8]
The most commonly used feeder is known as the weir feeder, the drilling fluid enters the feeder usually through a pipe welded to the outside wall near the bottom of the feeder tank, it fills the feeder to a predetermined point and like water flowing over a dam the mud (drilling fluid) spills over the weir and onto the screening area of the shaker.
The M939 and M939A1 models use a Cummins NHC 250, a 855 cubic inches (14.0 L) naturally aspirated inline 6 cylinder diesel engine developing 240 horsepower (180 kW) at 2100 rpm and 685 pound force-feet (929 N⋅m) of torque at 1,500 rpm. [8] This was the standard engine of the M809 series.
A block and tackle [1] [2] or only tackle [3] is a system of two or more pulleys with a rope or cable threaded between them, usually used to lift heavy loads.. The pulleys are assembled to form blocks and then blocks are paired so that one is fixed and one moves with the load.