Search results
Results from the WOW.Com Content Network
The radiant barrier should be installed in a manner to minimize dust accumulation on the reflective surface. Radiant barriers are more effective in hot climates than in cooler/cold climates (especially when cooling air ducts are located in the attic). When the sun heats a roof, it's primarily the sun's radiant energy that makes the roof hot ...
He immediately grasped that they might be used as a replacement for foil radiant barriers, and proceeded to perform experiments verifying their viability for this use. In 1986 these coatings were applied for the first commercial application in homes built by Centex Corporation.
An aluminum foil radiant barrier can be placed either way – the shiny side is created by the rolling mill during the manufacturing process and does not affect the reflective of the foil material. As radiant barriers work by reflecting infra-red energy, the aluminum foil would work just the same if both sides were dull.
A radiator reflector is a thin sheet or foil applied to the wall behind, and closely spaced from, a domestic heating radiator. The intention is to reduce heat losses into the wall by reflecting radiant heat away from the wall. It is a form of radiant barrier and is intended to reduce energy losses and hence decrease fuel expenditure.
The function of a vapor barrier is to retard the migration of water vapor. A vapor barrier is not typically intended to retard the migration of air. This is the function of air barriers. [8] Air is mixed with water vapor. When air moves from location to location due to an air pressure difference, the vapor moves with it.
Installed faced fiberglass batt insulation with its R-value visible (R-21) [1]. The R-value (in K⋅m 2 /W) is a measure of how well a two-dimensional barrier, such as a layer of insulation, a window or a complete wall or ceiling, resists the conductive [2] flow of heat, in the context of construction. [3]
The coating also reduces the permeability of the film to light, water and oxygen. The properties of the film remain, such as higher toughness, the ability to be heat sealed, and a lower density at a lower cost than an aluminium foil. This gives metallised films some advantages over aluminium foil and aluminium foil laminates.
Radiant heating and cooling originated as separate systems but now share a similar form. Radiant heating has a long history in Asia and Europe. The earliest systems, from as early as 5000 BC, were found in northern China and Korea. Archaeological findings show kang and dikang, heated beds and floors in ancient Chinese homes. Kang originated in ...