Search results
Results from the WOW.Com Content Network
Normalizing not only produces pearlite but also martensite and sometimes bainite, which gives harder and stronger steel but with less ductility for the same composition than full annealing. In the normalizing process the steel is heated to about 40 degrees Celsius above its upper critical temperature limit, held at this temperature for some ...
Tempering is a process of heat treating, which is used to increase the toughness of iron-based alloys. Tempering is usually performed after hardening, to reduce some of the excess hardness, and is done by heating the metal to some temperature below the critical point for a certain period of time, then allowing it to cool in still air. The exact ...
The high temperature of annealing may result in oxidation of the metal's surface, resulting in scale. If scale must be avoided, annealing is carried out in a special atmosphere, such as with endothermic gas (a mixture of carbon monoxide, hydrogen gas, and nitrogen gas). Annealing is also done in forming gas, a mixture of hydrogen and nitrogen.
Precipitation strengthening is possible if the line of solid solubility slopes strongly toward the center of a phase diagram.While a large volume of precipitate particles is desirable, a small enough amount of the alloying element should be added so that it remains easily soluble at some reasonable annealing temperature.
As with conventional quench and tempering the material being heat treated must be cooled from the austenitizing temperature quickly enough to avoid the formation of pearlite. The specific cooling rate that is necessary to avoid the formation of pearlite is a product of the chemistry of the austenite phase and thus the alloy being processed.
Equipment. Consolidated Engineering Company Archived 2013-11-05 at the Wayback Machine Annealing furnaces cover a broad range of Steel and Aluminum applications including tempering, normalizing, and aging, and similar automated loading, unloading and natural or forced cooling is possible with roller hearth, tip-up or batch arrangements.
Cryogenic tempering is two phase metal treatment that involves a descent and ascent phase, including a cryogenic treatment process (known as "cryogenic processing") where the material is slowly cooled to ultra low temperatures (typically around -300°F / -184°C), which is then optionally reheated slowly (typically up to +325°F / 162°C).
The point of normalizing is to remove the stresses which may have built up within the body of the blade while it was being forged. During the forging process, the blade might be heated and cooled differentially creating stress, some parts might be hammered more than others, some areas hammered enough to harden them.