enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Wood finishing - Wikipedia

   en.wikipedia.org/wiki/Wood_finishing

   Liquid wood finishes are applied via automated spray guns in an enclosed environment or spray cabin. The material then can enter an oven or be sanded again depending on the manufacturer’s setup. The material can also be recycled through the line to apply another coat of finish or continue in a system that adds successive coats depending on ...

3. Primer (paint) - Wikipedia

   en.wikipedia.org/wiki/Primer_(paint)

   Primer reduces the number of paint coats needed for good coverage and even color. A thin layer of paint may still be permeable to water. Water can permeate into the wood and cause warping, mildew, or dry rot. Primer improves the waterproofing of the finish. [4] Primers are not used as part of a wood stain treatment because they obscure the wood ...

4. Varnish - Wikipedia

   en.wikipedia.org/wiki/Varnish

   Violin varnishing is a multi-step process involving some or all of the following: primer, sealer, ground, color coats, and clear topcoat. Some systems use a drying oil varnish as described below, while others use spirit varnish made of resin(s) dissolved in alcohol. Touchup in repair or restoration is only done with solvent based varnish ...

5. Lacquer - Wikipedia

   en.wikipedia.org/wiki/Lacquer

   In modern techniques, lacquer means a range of clear or pigmented coatings that dry by solvent evaporation to produce a hard, durable finish. The finish can be of any sheen level from ultra matte to high gloss, and it can be further polished as required. Lacquer finishes are usually harder and more brittle than oil-based or latex paints and are ...

6. Sealcoat - Wikipedia

   en.wikipedia.org/wiki/Sealcoat

   The process is typically a two-coat application which requires 24 to 48 hours of curing before vehicles can be allowed back on the surface. Once the surface is properly prepared, then properly mixed sealer will be applied at about 1.5 square meters per liter (60 sq ft per U.S. gal; 72 sq ft per Imp gal) per coat.

7. Superhydrophobic coating - Wikipedia

   en.wikipedia.org/wiki/Superhydrophobic_coating

   In industry, super-hydrophobic coatings are used in ultra-dry surface applications. The coating can be sprayed onto objects to make them waterproof. The spray is anti-corrosive and anti-icing; has cleaning capabilities; and can be used to protect circuits and grids. Superhydrophobic coatings have important applications in maritime industry ...