Search results
Results from the WOW.Com Content Network
Blast furnaces differ from bloomeries and reverberatory furnaces in that in a blast furnace, flue gas is in direct contact with the ore and iron, allowing carbon monoxide to diffuse into the ore and reduce the iron oxide. The blast furnace operates as a countercurrent exchange process whereas a bloomery does not.
For blast furnaces, direct reduction corresponds to the reduction of oxides by the carbon in the coke. However, in practice, direct reduction only plays a significant role in the final stage of iron reduction in a blast furnace, by helping to reduce wustite (FeO) to iron. In this case, the chemical reaction can be trivially described as follows ...
A furnace smelting lead uses a reduction reaction; it generates an off-gas containing carbon monoxide, similar to blast furnace gas, which needs to be disposed of, usually by flaring. In contrast to a conventional blast furnace used to make iron, lead metal or copper matte and slag were run off more or less continuously.
the production of ferromanganese in the blast furnace requires a high manganese yield and therefore high basicities, up to i = 1.7 or 1.8 (bearing in mind that in this particular case, the index corresponds to = [] + [] + [] []!). Meltability is a secondary consideration in this case, as slag temperatures can reach 1,650°C (instead of 1,450°C ...
The coking plant that feeds a battery of blast furnaces is just as expensive as the blast furnace and requires a specific quality of coal. [ 64 ] [ 65 ] Conversely, many direct-reduction processes are disadvantaged by the costly transformation of ore into pellets: these cost on average 70% more than raw ore. [ 66 ]
The puddling furnace is a metalmaking technology used to create wrought iron or steel from the pig iron produced in a blast furnace. The furnace is constructed to pull the hot air over the iron without the fuel coming into direct contact with the iron, a system generally known as a reverberatory furnace or open hearth furnace .
Blast furnace gas (BFG) [1] is a by-product of blast furnaces that is generated when the iron ore is reduced with coke to metallic iron. It has a very low heating value , about 3.5 MJ/m 3 (93 BTU /cu.ft), [ 2 ] because it consists of about 51 vol% nitrogen and 22 vol% carbon dioxide , which are not flammable.
This used a blast furnace to make pig iron, which then had to undergo a further process to make forgeable bar iron. Processes for the second stage include fining in a finery forge. In the 13th century during the High Middle Ages the blast furnace was introduced by China who had been using it since as early as 200 b.c during the Qin dynasty.