enow.com Web Search

Search results

  1. Results from the WOW.Com Content Network
  2. Precast concrete - Wikipedia

    en.wikipedia.org/wiki/Precast_concrete

    The overall thickness of sandwich wall panels in commercial applications is typically 8 inches, but their designs are often customized to the application. In a typical 8-inch wall panel the concrete wythes are each 2-3/8 inches thick), sandwiching 3-1/4 inches of high R-value insulating foam. The interior and exterior wythes of concrete are ...

  3. Water–cement ratio - Wikipedia

    en.wikipedia.org/wiki/Water–cement_ratio

    A w/c ratio higher than 0.60 is not acceptable as fresh concrete becomes "soup" [2] and leads to a higher porosity and to very poor quality hardened concrete as publicly stated by Prof. Gustave Magnel (1889-1955, Ghent University, Belgium) during an official address to American building contractors at the occasion of one of his visits in the ...

  4. Concrete - Wikipedia

    en.wikipedia.org/wiki/Concrete

    The placement consisted of 10,251 cubic yards of concrete placed in 58.5 hours using two concrete pumps and two dedicated concrete batch plants. Upon curing, this placement allows the 50,180-square-foot (4,662 m 2 ) cofferdam to be dewatered approximately 26 feet (7.9 m) below sea level to allow the construction of the Inner Harbor Navigation ...

  5. Area density - Wikipedia

    en.wikipedia.org/wiki/Area_density

    Fabric "weight" is often specified as mass per unit area, grams per square meter (gsm) or ounces per square yard. It is also sometimes specified in ounces per yard in a standard width for the particular cloth. One gram per square meter equals 0.0295 ounces per square yard; one ounce per square yard equals 33.9 grams per square meter.

  6. Precast concrete lifting anchor system - Wikipedia

    en.wikipedia.org/wiki/Precast_concrete_lifting...

    When selecting an anchor, consider the element formwork and the ease of placement and securing of the anchor prior and during the pouring of the concrete. For example, some of the anchors shown in figures 4-6, can be placed into thin wall elements as the anchor chair maintains the position relative to the element thickness.

  7. Double tee - Wikipedia

    en.wikipedia.org/wiki/Double_tee

    A benefit of pre-topped double tees is a higher quality concrete for more durable surface to reduce traffic wears. Factories can produce the topping with minimum concrete strength of 5,000 psi. In some areas, the strength can be 6,000-8,000 psi. This compares to the field-placed concrete topping with the lower concrete strength of 4,000 psi. [6]

  8. Hollow-core slab - Wikipedia

    en.wikipedia.org/wiki/Hollow-core_slab

    Hollow-core slabs and wall elements without prestressed steel wire can be formed by extruders. The size of these elements will typically range in width from 600 to 2400 mm, in thickness from 150 to 500 mm, and can be delivered in lengths of up to 24 m. [1] The voids of the hollow core can be used as conduit for installations.

  9. Retaining wall - Wikipedia

    en.wikipedia.org/wiki/Retaining_wall

    A retaining wall is designed to hold in place a mass of earth or the like, such as the edge of a terrace or excavation. The structure is constructed to resist the lateral pressure of soil when there is a desired change in ground elevation that exceeds the angle of repose of the soil.