Search results
Results from the WOW.Com Content Network
The Buick V6 is an OHV V6 engine developed by the Buick division of General Motors and first introduced in 1962. The engine was originally 198 cu in (3.2 L) and was marketed as the Fireball engine. GM continued to develop and refine the 231 cu in (3.8 L) V6, eventually and commonly referred to simply as the 3800, through numerous iterations.
1977–2013 Chevrolet 90° V6 engine (derived from the Chevrolet Small-Block" V8; now marketed as GM Vortec V6 or Vortec 4300 or EcoTec3 V6) 1979–2010 Chevrolet 60-Degree V6; 1994–2005 Opel 54-Degree L81 V6 (used in the Saturn Vue, Cadillac Catera and Saturn L series) 1995–present Suzuki H (used in several models built for GM by Suzuki)
The EcoFlex engine is a version of the TwinPort tuned to provide better fuel economy and lower emissions. The 1.4 L engine was introduced in 2008 and the 1.0 L engine in 2010. For model year 2012, the EcoFlex engines have been updated with double cam phasing (DCVCP) in a Gen III block.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
The LE2 is the direct-injection 1.4 L turbocharged variant of the SGE, with a 74 mm × 81.3 mm (2.91 in × 3.20 in) bore and stroke for a total capacity of 1,399 cc (1.4 L). Compression ratio is 10.0:1 and the engine can run on regular grade gasoline. The LE2 is also paired with a start-stop system in some vehicles.
The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.2 and 2.5 litres.Confusingly, the Ecotec name was also applied to both the Buick V6 Engine when used in Holden Vehicles, as well as the final DOHC derivatives of the previous GM Family II engine; the architecture was substantially re-engineered for this new Ecotec ...
The 304.6-cubic-inch (5.0 L) 305 had a 4.25 in × 3.58 in (108 mm × 91 mm) bore and stroke. [11] The 305A was equipped with a single barrel carburetor and produced 150 hp (112 kW) gross at 3600 RPM and 260 lb⋅ft (353 N⋅m) gross at 1600 RPM (measured without air cleaner or accessories in an ideal environment).
The LeSabre's engine from 1992 to 1995 was the 3800 V6 (L27), which produced 170 hp (127 kW) and 225 lb·ft (305 N·m) The 3513 lb (1593 kg) car got 18 mpg (13.1 L/100 km) in the city and 28 mpg (8.4 L/100 km) on the highway, which was slightly better than the 1991 model. The car accelerated to 60 mph (97 km/h) in 8.9 seconds and could cover ...