Search results
Results from the WOW.Com Content Network
Because of the two passes of the film, the format was sometimes called Double 8. The frame size of regular 8 mm is 4.8 mm × 3.5 mm, and 1 meter of film contains 264 pictures. Normally, Double 8 is filmed at 16 or 18 frames per second. Common length film spools allowed filming of about 3 to 4 + 1 ⁄ 2 minutes at 12, 15, 16, and 18 frames per ...
There are 80 perforations per foot of film, exactly twice the 40 perforations per foot for 16 mm film, which gives a pitch of 0.15 in (3.81 mm) between adjacent perforations (and frames). [6] This film is run through the camera, exposing on only half the film width; the spool is then reversed and the film run through again, exposing on the ...
First known film is the first film (not including tests) made with the format and intended for release. Negative gauge is the film gauge (width) used for the original camera negative. Negative aspect ratio is the image ratio determined by the ratio of the gate dimensions multiplied by the anamorphic power of the camera lenses (1× in the case ...
This template creates a frame like those surrounding images. This template can be used to put two or more images into a frame together, or as a wrapper for more complicated templates like Template:Superimpose. Template parameters [Edit template data] Parameter Description Type Status Content content Content of the main section (generally images). Content required Width width The width of the ...
[[Category:Film templates]] to the <includeonly> section at the bottom of that page. Otherwise, add <noinclude>[[Category:Film templates]]</noinclude> to the end of the template code, making sure it starts on the same line as the code's last character.
Single-8, also known as 8 mm Type S, Model II, is a motion picture film format introduced by Fujifilm of Japan in 1965 as an alternative to the Kodak Super 8 format. Single-8 and Super 8 use mutually incompatible cartridges, but the 8 mm film within each cartridge shares the same frame and perforation size and arrangement, so developed Single-8 and Super 8 films can be shown using the same ...
Film is commonly checked for broken sprocket holes before presentation, a process known as "spooling". Mechanical devices exist for this purpose, but the classic method is to place the finger and thumb of a gloved hand on the edges of the film, which is mounted on a winding bench, and to slowly run the film through the fingers, feeling for snags.
That puts the motor cue at frames 200–197 (12.47 to 12.28 feet; or 12-foot-8-frames to 12-foot-5-frames) from the end of the picture section of the reel, and the changeover cue at frames 28–25 (1.75 to 1.56 feet; or 1-foot-12-frames to 1-foot-9-frames) from the end. Prior to January 2005, domestic United States release prints printed by ...