Search results
Results from the WOW.Com Content Network
A block upconverter (BUC) is used in the transmission of satellite signals. It converts a band of frequencies from a lower frequency to a higher frequency. Modern BUCs convert from the L band to K u band, C band and K a band. Older BUCs convert from a 70 MHz intermediate frequency (IF) to K u band or C band.
Special LNBs have been developed for use in single-cable distribution systems. All four sub-bands of the Ku band (low frequency/horizontal polarity, high frequency/horizontal polarity, low frequency/vertical polarity, high frequency/vertical polarity) are received by a conventional front end, amplified and downconverted to the L-band, to be fed to a number of SatCR (Satellite Channel Router ...
The antenna is attached to a down-converter or transceiver to receive and transmit the microwave signal and convert them to frequencies compatible with standard TV tuners (much like on satellite dishes where the signals are converted down to frequencies more compatible with standard TV coaxial cabling), some antennas use an integrated down ...
Conventional satellite TV reception systems convert the received transmissions to an intermediate frequency (IF) for distribution via dedicated coaxial cables to one or more satellite tuners and demodulators in set-top boxes. SAT>IP allows the satellite TV distribution to share a data network and enables display and viewing of the signals on ...
A universal LNB has a switchable local oscillator frequency of 9.75/10.60 GHz to provide two modes of operation: low band reception (10.70–11.70 GHz) and high band reception (11.70–12.75 GHz). The local oscillator frequency is switched in response to a 22 kHz signal superimposed on the supply voltage from the connected receiver.
A satellite modem is not the only device needed to establish a communication channel. Other equipment that is essential for creating a satellite link include satellite antennas and frequency converters. Data to be transmitted are transferred to a modem from data terminal equipment (e.g. a computer).
Satellite Frequency bands; S band; C band; Ku band; Ka band; See also. Digital radio § Digital television (DTV) broadcasting systems; OFDM system comparison table;
The ASI output of a DVB Integrated Receiver/Decoder (IRD). It carries the entire MPEG transport stream being received from a DVB satellite feed entering the RF input (far left side in picture). Asynchronous Serial Interface, or ASI, is a method of carrying an MPEG Transport Stream over 75-ohm copper coaxial cable or optical fiber. [1]