Search results
Results from the WOW.Com Content Network
The millimetre (SI symbol: mm) is a unit of length in the metric system equal to 10 −3 metres ( 1 / 1 000 m = 0.001 m). To help compare different orders of magnitude, this section lists lengths between 10 −3 m and 10 −2 m (1 mm and 1 cm). 1.0 mm – 1/1,000 of a meter; 1.0 mm – 0.03937 inches or 5/127 (exactly)
The 6.8mm Remington Special Purpose Cartridge (6.8 SPC, 6.8 SPC II or 6.8×43mm) is a rimless bottlenecked intermediate rifle cartridge that was developed by Remington Arms in collaboration with members of the U.S. Army Marksmanship Unit and United States Special Operations Command [6] to possibly replace the 5.56 NATO cartridge in short barreled rifles (SBR) and carbines.
The French scale measures and is proportional to the outer diameter of a catheter, with 1 French (Fr) defined as 1 ⁄ 3 millimeter, making the relationship: 1 mm = 3 Fr. Thus, the outer diameter of a catheter in millimeters can be calculated by dividing the French size by 3. [ 2 ]
4 in × 1 in × 5 + 3 ⁄ 4 in (102 mm × 25 mm × 146 mm) = 377 cm 3. This smaller form factor is similar to that used in an HDD by Rodime in 1983, which was the same size as the "half height" 3 + 1 ⁄ 2 in (89 mm) FDD, i.e., 1.63 inches (41 mm) high. Today, the 1-inch high ("one-third height", "slimline", or "low-profile") version of this ...
±1 mm (0.039 in) for dimensions up to 150 mm (5.9 in), ±1.5 mm (0.059 in) for lengths in the range 150 to 600 mm (5.9 to 23.6 in) and; ±2 mm (0.079 in) for any dimension above 600 mm (24 in). There used to be a standard, DIN 198, that was just a table of recommended A series formats for a number of business applications.
This is a list of firearm cartridges which have bullets in the 5.00 to 5.99 mm (0.197 to 0.236 in) caliber range. Length refers to the cartridge case length. OAL refers to the overall length of the cartridge. All measurements are in mm (in).
For example, a 10 cm (3.9 in) circular would have a maximum precision approximately equal to a 31.4 cm (12.4 in) ordinary slide rule. Circular slide rules also eliminate "off-scale" calculations, because the scales were designed to "wrap around"; they never have to be reoriented when results are near 1.0—the rule is always on scale.
Mommes (mm), traditionally used to measure silk fabrics, the weight in pounds of a piece of fabric if it were sized 45 inches by 100 yards (1.2 m by 90 m). One momme = 4.340 g/m 2; 8 mommes is approximately 1 ounce per square yard or 35 g/m 2.