Search results
Results from the WOW.Com Content Network
Typically, the system firmware (UEFI or BIOS) will allow the user to configure a boot order. If the boot order is set to "first, the DVD drive; second, the hard disk drive", then the firmware will try to boot from the DVD drive, and if this fails (e.g. because there is no DVD in the drive), it will try to boot from the local hard disk drive.
Floppy-disk drive or adapter 700–799: Math coprocessor 900–999: Parallel printer port 1000–1099: Alternate printer adapter 1100–1299: Asynchronous communication device, adapter, or port 1300–1399: Game port 1400–1499: Color/graphics printer 1500–1599: Synchronous communication device, adapter, or port 1700–1799: Hard drive or ...
On system with BIOS firmware, the BIOS invokes MBR boot code from a hard disk drive at startup. The MBR boot code and the VBR boot code are OS-specific. In Microsoft Windows, the MBR boot code tries to find an active partition (the MBR is only 512 bytes), then executes the VBR boot code of an active partition. The VBR boot code tries to find ...
A modern PC is configured to attempt to boot from various devices in a certain order. If a computer is not booting from the device desired, such as the floppy drive, the user may have to enter the BIOS Setup function by pressing a special key when the computer is first turned on (such as Delete, F1, F2, F10 or F12), and then changing the boot order. [6]
Once all the boot and system drivers have been loaded, the kernel starts the session manager (smss.exe), which begins the login process. After the user has successfully logged into the machine, winlogon applies User and Computer Group Policy setting and runs startup programs declared in the Windows Registry and in "Startup" folders.
When used, the BIOS boot partition contains the second stage of the boot loader program, such as the GRUB 2; the first stage is the code that is contained within the Master Boot Record (MBR). Use of this partition is not the only way BIOS-based boot can be performed while using GPT-partitioned hard drives; however, complex boot loaders such as ...
Some virtual machine infrastructure can directly import and export a boot image for direct installation to "bare metal", i.e. a disk. This is the standard technique for OEMs to install identical copies of an operating system on many identical machines: The boot image is created as a virtual machine and then exported, or created on one disk and then copied via a boot image control ...
DL = boot drive unit (see above) MS-DOS 2.0–7.0 / PC DOS 2.0–6.3 MBRs do not pass on the DL value received on entry, but they rather use the boot status entry in the partition table entry of the selected primary partition as physical boot drive unit.