Search results
Results from the WOW.Com Content Network
Adhesive removers are intended to break down glue so that it can be removed from surfaces easily. [1] [2] [3] Formulations may be designed to remove a broad range of adhesives or to address a specific bond. [1] Many general purpose removers are intended to remove residue from adhesive tape. [1] [2] [3]
Coatings were prepared by moisture curing of IPDI capped hydroxyl terminated polybutadiene/clay dispersions in a relative humidity (RH) of 50% at 25 °C. Moisture cured polyurethane–urea coatings have been made by reacting 1,2,3-triazole rich polyether polyols with HMDI at NCO/OH eq. ratio of 1.2 to obtain isocyanate-terminated polyurethane ...
The Mapei Group has been publishing a two-monthly magazine in Italian and English since 1991. Adriana Spazzoli was the editor-in-chief of the magazine called Realtà Mapei for 28 years until 2019. 160,000 copies of the magazine are distributed all over Italy and 22,000 copies of Realtà Mapei International are published worldwide.
If the adhesive is to be used within six months, it is not necessary to refrigerate it. Cyanoacrylates are moisture-sensitive, and moving from a cool to a hot location will create condensation; after removing from the refrigerator, it is best to let the adhesive reach room temperature before opening. After opening, it should be used within 30 days.
Adhesives may be broadly divided in two classes: structural and pressure-sensitive. To form a permanent bond, structural adhesives harden via processes such as evaporation of solvent (for example, white glue), reaction with UV radiation (as in dental adhesives), chemical reaction (such as two part epoxy), or cooling (as in hot melt).
The high tack material comprises about 95% of the adhesive and provides the majority of the adhesive's tackiness. [6] In addition to these 2 components, surfactants are often added to reduce the surface energy of the adhesive and facilitate adhesion to high surface energy substrates (metals, other polymeric materials). [11]
The quality of adhesive bonding depends strongly on the ability of the adhesive to efficiently cover (wet) the substrate area. This happens when the surface energy of the substrate is greater than the surface energy of the adhesive. However, high-strength adhesives have high surface energy.
High stability at elevated temperatures and resistance to ultraviolet radiation, which can be further enhanced with suitable stabilizers. High vinylacetate content can serve for formulating a hot-melt pressure-sensitive adhesive (HMPSA). EVA formulations are compatible with paraffin. EVA was the base for the original hot melt composition.