Search results
Results from the WOW.Com Content Network
35 mm equivalent focal lengths are calculated by multiplying the actual focal length of the lens by the crop factor of the sensor. Typical crop factors are 1.26× – 1.29× for Canon (1.35× for Sigma "H") APS-H format, 1.5× for Nikon APS-C ("DX") format (also used by Sony, Pentax, Fuji, Samsung and others), 1.6× for Canon APS-C format, 2× for Micro Four Thirds format, 2.7× for 1-inch ...
The focal length of a lens, together with the size of the image sensor or film in the camera, determines the angle of view. A lens is considered to be a "normal lens" in terms of its angle of view on a camera when its focal length is approximately equal to the diagonal dimension of the film format or image sensor format. [4]
A 100 mm focal length f /4 lens has an entrance pupil diameter of 25 mm. A 100 mm focal length f /2 lens has an entrance pupil diameter of 50 mm. Since the area is proportional to the square of the pupil diameter, [6] the amount of light admitted by the f /2 lens is four times that of the f /4 lens.
The crop factor is sometimes referred to as the focal length multiplier ("Film") since multiplying a lens focal length by the crop factor gives the focal length of a lens that would yield the same field of view if used on the reference format. For example, a lens with a 50 mm focal length on an imaging area with a crop factor of 1.6 with ...
The focal point F and focal length f of a positive (convex) lens, a negative (concave) lens, a concave mirror, and a convex mirror.. The focal length of an optical system is a measure of how strongly the system converges or diverges light; it is the inverse of the system's optical power.
Diagram illustrating the flange focal length of an SLR–type and a mirrorless–type camera. For an interchangeable lens camera, the flange focal distance (FFD) (also known as the flange-to-film distance, flange focal depth, flange back distance (FBD), flange focal length (FFL), back focus [1] or register, depending on the usage and source) of a lens mount system is the distance from the ...
Log-log graphs of lens focal length vs crop factor vs equivalent focal length for 35 mm film or image sensor size (= the focal length multiplied by a crop factor) vs diagonal, horizontal and vertical angles of view for film or sensors of 3:2 and 4:3 aspect ratios.
There is no precise definition of the term, but lenses marketed as "standard zoom" usually cover a range of at least 30mm to 70mm in terms of 35mm equivalent focal length with an optical zoom ratio of 2.5× (e.g. 28-70mm) to 5× (e.g. 24-120mm) — the most common being 3× (e.g. 24-70mm). [1]