Search results
Results from the WOW.Com Content Network
The most characteristic element of the transfer tube pump is S-shaped "transfer tube" installed inside the feed hopper, which connects the advancing piston to the outlet. In other words, the pump cylinder which is currently pushing the material is connected to the delivery line by the transfer tube, while the retracting (pulling) cylinder is ...
At the end of the stroke, the pump switches, i.e., the transfer tube turns in front of the other filled pressure cylinders, and the pressure pistons change their movement direction. [4] Concrete pump drives are now exclusively hydraulic, so control options vary between individual manufacturers. Each system has certain advantages and ...
Pneumatic tubes (or capsule pipelines, also known as pneumatic tube transport or PTT) are systems that propel cylindrical containers through networks of tubes by compressed air or by partial vacuum. They are used for transporting solid objects, as opposed to conventional pipelines which transport fluids.
The tubes are supplied by manufacturers in lengths of 6 m, cleaned, oiled and plugged. The tubes are interconnected by different types of flanges (especially for the larger sizes and pressures), welding cones/nipples (with o-ring seal), several types of flare connection and by cut-rings. In larger sizes, hydraulic pipes are used.
Culvert with secure headwall in Bromsgrove, England Stone culvert in Haapsalu, Estonia Steel culvert with a plunge pool below A multiple culvert assembly in Italy Precast concrete box culvert Large box culvert on Rio Monterroso. A culvert is a structure that channels water past an obstacle or to a subterranean waterway.
The post-treatment required for the overflow stream depends both on the nature of the inlet stream and what the overflow will be used for. For example, if the fluid being put through the lamella clarifier comes from a heavy industrial plant it may require post-treatment to remove oil and grease especially if the effluent is going to be ...
In the "top-down" method, a depth is excavated, a concrete slab is laid, and then excavation continues downwards to the base of the station box. At the end of excavation, a similar result to the "bottom-up" method is obtained – with the concrete slabs and supports for the various levels of the station already constructed. [2] [3]
Higher pressure peristaltic hose pumps which can typically operate against up to 16 bar (230 psi) in continuous service, use shoes (rollers only used on low-pressure types) and have casings filled with lubricant to prevent abrasion of the exterior of the pump tube and to aid in the dissipation of heat, and use reinforced tubes, often called ...