Search results
Results from the WOW.Com Content Network
The resulting engine was somewhat improved as to power and efficiency. The 5.9 L V8 engines followed suit in 1989, but also received the overall improved "308" cylinder heads (casting number 4448308) that featured significantly higher flowing exhaust ports and a return to the original 1971 (non-fast burn) combustion chamber.
There was a U.S. auto industry-wide shift to lower compression ratios in mid-1971, so AMC increased combustion chamber size to 58-59 cc. The first three digits of the casting number on the large chamber heads are 321, 322, or 323 depending on year. The only difference between small and large chamber Gen-3 heads is the combustion chamber size.
This design dates back to 1940, when it was introduced in the Nash 600 as an L-head 172.6 cu in (2.8 L) engine. Displacement was increased over the years to 184 cu in (3.0 L), and finally to 195.6 in the early-1950s. The block casting was changed to allow an OHV head for the 1956 Rambler (the L-head was discontinued).
It is not the same as Chrysler's 360 V8. [4] Chrysler continued production of the AMC 360 engine after the 1987 buyout of AMC to power the full-size Jeep Wagoneer (SJ) SUV that was produced until 1991. [5] It was one of the last carbureted car/truck engines built in North America. [6] Chrysler never used this engine in any other vehicle.
The Chrysler B and RB engines are a series of big-block V8 gasoline engines introduced in 1958 to replace the Chrysler FirePower (first generation Hemi) engines. The B and RB engines are often referred to as "wedge" engines because they use wedge-shaped combustion chambers; this differentiates them from Chrysler's 426 Hemi big block engines that are typically referred to as "Hemi" or "426 Hemi ...
The Chrysler 1.8, 2.0, and 2.4 are inline-4 engines designed originally for the Dodge and Plymouth Neon compact car. These engines were loosely based on their predecessors, the Chrysler 2.2 & 2.5 engine, sharing the same 87.5 mm (3.44 in) bore.
All Oldsmobile V8s were assembled at plants in Lansing, Michigan while the engine block and cylinder heads were cast at Saginaw Metal Casting Operations. All Oldsmobile V8s use a 90° bank angle, and most share a common stroke dimension: 3.4375 in (87.31 mm) for early Rockets, 3.6875 in (93.66 mm) for later Generation 1 engines, and 3.385 in ...
A 1964 Rambler American with a 195.6 OHV engine. American Motors' first straight-six engine was the 196 cubic inch (195.6 cu in (3.2 L)) six produced from 1952 through 1965, initially as a flathead (L-head) side-valve, and later an overhead valve (OHV) version.