Search results
Results from the WOW.Com Content Network
The 6.5-06 A-Square uses a .264" diameter bullet loaded into a modified .30-06 Springfield cartridge. The neck is reduced to accept the smaller bullet, the shoulder is longer than that of the parent cartridge, and it has a 17.5 degree shoulder angle leading to the neck of the case, where the bullet is seated. [1]
There are small dimensional differences between the .256 Newton and 6.5-06 later standardized by A-Square: the 256 Newton has an increased body taper, the shoulder is moved back, and has a sharper, 23 degree shoulder while the 6.5-06 has a 17.5 degree shoulder like the parent 30-06 case. SAAMI lists the 6.5-06 A-Square in the Centerfile Rifle ...
The 6.5 mm (.264 caliber) has been extremely popular in Europe and especially in the Scandinavian countries and this trend continues today. [5] The 6.5×52mm Carcano, 6.5×53mmR (.256 Mannlicher), 6.5×54mm Mannlicher-Schönauer, 6.5×55mm Swedish Mauser, 6.5×58mmR Krag–Jørgensen and the 6.5×58mm Portuguese are among these cartridges of originally military European origin.
A guide to the recoil from the cartridge, and an indicator of bullet penetration potential. The .30-06 Springfield (at 2.064 lbf-s) is considered the upper limit for tolerable recoil for inexperienced rifle shooters. [2] Chg: Propellant charge, in grains; Dia: Bullet diameter, in inches; BC: Ballistic coefficient, G1 model; L: Case length (mm)
Since the 6.5-08 was a wildcat cartridge, variations existed between cartridge chambers depending on the reamer used to cut the chamber. Furthermore, depending on whether one chose to form the case from .243 Winchester or .308 Winchester influenced the neck thickness and therefore the dimensions of the cartridge.
Case length Rim Base Shoulder Neck OAL .243 Winchester: 6.17 (.243) 51.94 (2.035) 12.00 (.472) 11.96 (.470) 11.5 (.454) 7.01 (.276) 68.82 (2.709) 6mm BR: 6.17 (.243) 39.6 (1.560) 12.00 (.4728) 11.96 [1] (.4709) 11.6 (.458) 6.95 (.274) 62.00 (2.441) [1] 6×45mm SAW: 6.17 (.243) 45.01 (1.772) 10.36 (.408) 10.26: 9.72: 6.63: 65.44 (2.576) 6mm PPC ...
The 6.5mm Creedmoor (6.5×48mm), [6] designated 6.5 Creedmoor by SAAMI, 6,5 Creedmoor by the C.I.P. [4] is a centerfire rifle cartridge introduced by Hornady in 2007. [7]It was developed by Hornady senior ballistics scientist Dave Emary in partnership with Dennis DeMille, the vice-president of product development at Creedmoor Sports, hence the name.
Since its dimensions are taken from the 30-06 cartridge from the 1906 US Army cartridge, the lower half of these case dimensions have been used for designing the .243 Winchester, 25-06, .270 Winchester, .280 Remington, 7mm-08, .308, .30-06, .35 Whelen, and others.