enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [29] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

3. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as 8.5 in × 20.0 in (220 mm × 510 mm).

4. Talk:Tire code - Wikipedia

   en.wikipedia.org/wiki/Talk:Tire_code

   If your tire size has two sets of numbers (6-12, 5.00-15, 11.2-24…) the first number (5.00-15) is the approximate width in inches; the second number (5.00-15) is the rim diameter. If your tire size has three sets of numbers (15/6.00-6, 26/12.00-12, 31/15.50-15) the first number ( 26 /12.00-12) is the approximate height, the second number (26/ ...

5. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   The inner width of the rim on which the tire is mounted should be about 65% of the tire's nominal section width for tires smaller than 30 mm and 55% for those larger. The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height).

6. Plus sizing - Wikipedia

   en.wikipedia.org/wiki/Plus_sizing

   Plus sizing is the practice of replacing an automotive wheel with one of a larger diameter fitted with a new tire of lower aspect ratio so that the new tire has close to the same diameter and circumference as the original tire to minimize any changes in speedometer accuracy, torque and traction control, while reducing sidewall flex and (generally) increasing cornering ability.

7. Uniform Tire Quality Grading - Wikipedia

   en.wikipedia.org/wiki/Uniform_Tire_Quality_Grading

   These represent the tire's resistance to the generation of heat at speed. Tires graded A effectively dissipate heat up to a maximum speed that is greater than 115 mph. B rates at a maximum between 100 mph and 115 mph. C rates at a maximum of between 85 mph to 100 mph. Tires that cannot grade up to C or higher cannot be sold in the US. [9]