Search results
Results from the WOW.Com Content Network
In ISA temperature conditions the altimeter will read the height above the airfield/runway in the vicinity of the airfield. SPS/STD - 'Standard Pressure Setting' or just 'Standard' refers to the altimeter being set to the standard pressure of 1013.25 hPa. It is the setting that causes an altimeter to read the aircraft's flight level (FL).
12 November 1996, an Il-76 collided in mid air with a Saudi B747 near New Delhi India, following a level bust by the Il-76.; 12 November 1996, a B737 descended below its assigned holding level in the LHR stack, in IMC, to within 100 feet vertically and between 680 and 820 metres horizontally of an MD-81 at its correct level.
QFF is the location value plotted on surface synoptic chart and is closer to reality than QNH, though it is only indirectly used in aviation. [citation needed] Another method [which?]: The derivation assumes that an isothermal layer at the station temperature extends to the sea level.
At the time of impact, the passenger plane’s radio altitude was 313 feet. Radio altitude measures the height of an aircraft above a terrain, which in this case was the Potomac River, the NTSB said.
In aviation, a flight level (FL) is an aircraft's altitude as determined by a pressure altimeter using the International Standard Atmosphere. It is expressed in hundreds of feet or metres. The altimeter setting used is the ISA sea level pressure of 1013 hPa or 29.92 inHg. The actual surface pressure will vary from this at different locations ...
The greater the altitude, the lower the pressure. When a barometer is supplied with a nonlinear calibration so as to indicate altitude, the instrument is a type of altimeter called a pressure altimeter or barometric altimeter. A pressure altimeter is the altimeter found in most aircraft, and skydivers use wrist-mounted versions for similar ...
The transponder gets its altitude information from an encoding altimeter mounted behind the instrument panel that communicates via the Gillham code. Gillham code is a zero-padded 12-bit binary code using a parallel nine- [ 1 ] to eleven-wire interface , [ 2 ] the Gillham interface , that is used to transmit uncorrected barometric altitude ...
The altimeter is adjustable for local barometric pressure which must be set correctly to obtain accurate altitude readings, usually in either feet or meters. As the aircraft ascends, the capsules expand and the static pressure drops, causing the altimeter to indicate a higher altitude. The opposite effect occurs when descending.