Ad
related to: scanner frequency bands
Search results
Results from the WOW.Com Content Network
A radio band is a small frequency band (a contiguous section of the range of the radio spectrum) in which channels are usually used or set aside for the same purpose. To prevent interference and allow for efficient use of the radio spectrum, similar services are allocated in bands.
US frequency allocations chart, 2016. Frequency allocation (or spectrum allocation) is the part of spectrum management dealing with the designation and regulation of the electromagnetic spectrum into frequency bands, normally done by governments in most countries. [1]
An Icom IC-R5 hand-held scanner A GMRS radio that also has scanning capabilities. A scanner (also referred to as a radio scanner) is a radio receiver that can automatically tune, or scan, two or more discrete frequencies, stopping when it finds a signal on one of them and then continuing to scan other frequencies when the initial transmission ceases.
Shortwave bands are frequency allocations for use within the shortwave radio spectrum (the upper medium frequency [MF] band and all of the high frequency [HF] band). Radio waves in these frequency ranges can be used for very long distance (transcontinental) communication because they can reflect off layers of charged particles in the ionosphere and return to Earth beyond the horizon, a ...
Wide band Frequency modulation radio originated in the United States during the 1930s; the system was developed by the American electrical engineer Edwin Howard Armstrong. However, FM broadcasting did not become widespread, even in North America, until the 1960s. Frequency-modulated radio waves can be generated at any frequency.
Radio frequency (RF) is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency [1] range from around 20 kHz to around 300 GHz.
Radio frequencies used for cellular networks differ in ITU Regions (Americas, Europe, Africa and Asia). The first commercial standard for mobile connection in the United States was AMPS, which was in the 800 MHz frequency band.
There is significant scope for interference however, both on frequency and on adjacent frequencies, as the band is far from free. The frequencies from 430 to 440 MHz are allocated on a secondary basis to licensed radio amateurs who are allowed to use up to 40 W (16 dBW) between 430 and 432 MHz and 400 W (26 dBW) between 432 and 440 MHz.
Ad
related to: scanner frequency bands