Search results
Results from the WOW.Com Content Network
Miracast is "effectively a wireless HDMI cable, copying everything from one screen to another using the H.264 codec and its own digital rights management (DRM) layer emulating the HDMI system". The Wi-Fi Alliance suggested that Miracast could also be used by a set-top box wanting to stream content to a TV or tablet.
The link operates in either low power (LP) mode or high speed (HS) mode. In low power mode, the high-speed clock is disabled, and signal clocking information is embedded in the data. In this mode, the data rate is insufficient to drive a display, but is usable for sending configuration information and commands.
The signal standard and pinout are backward-compatible with CGA, allowing EGA monitors to be used on CGA cards and vice versa. Early VGA cards also used this connector. VGA connector (DE-15) Became a nearly ubiquitous analog computer display connector after first being introduced with IBM x86 machines. Older VGA connectors were DE-9 (9-pin).
Wireless HDMI is the wireless transmission of high-definition audio and video signals between devices, using unlicensed radio frequencies like 5 GHz, 60 GHz, or 190 GHz. This technology eliminates the need for an HDMI cable , allowing users to transmit signals wirelessly between the component device and the display device.
DisplayPort Dual-Mode (DP++), also called Dual-Mode DisplayPort, is a standard which allows DisplayPort sources to use simple passive adapters to connect to HDMI or DVI displays, and allows DisplayPort displays to use simple passive adapters to connect HDMI or DVI sources. Dual-mode is an optional feature, so not all DisplayPort sources ...
Carries standard definition video and does not carry audio on the same cable. Mini-DIN 4-pin Component. In popular use, it refers to a type of analog video information that is transmitted or stored as three separate signals. Either RGB interfaces or YPbPr: 3 RCA jacks: Composite, S-Video, and Component: VIVO = Mini-DIN 9-pin with breakout cable.
CEC [3] is a separate electrical signal from the other HDMI signals. This allows a device to disable its high-speed HDMI circuitry in sleep mode, but be woken up by CEC. It is a single shared bus, which is directly connected between all HDMI ports on a device, so it can flow through a device which is completely powered off (not just asleep).
The Apple Display Connector is physically incompatible with a standard DVI connector. The Apple DVI to ADC Adapter, [1] which cost $149US at launch but was in 2002 available for $99US, [2] takes USB and DVI connections from the computer, adds power from its own integrated power supply, and combines them into an ADC output, allowing ADC monitors to be used with DVI-based machines.