Ads
related to: chlorine powder for water tank repair fittingsuswatersystems.com has been visited by 10K+ users in the past month
Search results
Results from the WOW.Com Content Network
Brine draw: Water is directed through a jet pump, which pulls salt water from the brine tank, before the water and brine pass through the resin bed in the normal direction, if co-current, or in the reverse direction, if counter-current. [12] The output of this typically thirty-minute process is discarded through the drain hose.
Shock chlorination is a process used in many swimming pools, water wells, springs, and other water sources to reduce the bacterial and algal residue in the water. Shock chlorination is performed by mixing a large amount of sodium hypochlorite, which can be in the form of a powder or a liquid such as chlorine bleach, into the water.
The hypochlorite can be in the form of a powder or a liquid such as chlorine bleach (solution of sodium hypochlorite or calcium hypochlorite in water). Water that is being shock chlorinated should not be swum in or drunk until the sodium hypochlorite count in the water goes down to three parts per million (ppm) or until the calcium hypochlorite ...
Depending on the method, a varying amount of chlorine is introduced into the polymer allowing for a measured way to fine-tune the final properties. The chlorine content may vary from manufacturer to manufacturer; the base can be as low as PVC 56.7% to as high as 74% by mass, although most commercial resins have chlorine content from 63% to 69%.
Chlorine is a respiratory irritant that attacks mucous membranes and burns the skin. As little as 3.53 ppm can be detected as an odor, and 1000 ppm is likely to be fatal after a few deep breaths. Exposure to chlorine has been limited to 0.5 ppm (8-hour time-weighted average—38-hour week) by the U.S. OSHA. [9]
Pure" samples have 99.2% active chlorine. Given common industrial purity, an active chlorine content of 65-70% is typical. [2] It is the main active ingredient of commercial products called bleaching powder, [a] used for water treatment and as a bleaching agent. [3]
Two drops of 5% solution also suffices. Double the amount of bleach if the water is cloudy, colored, or very cold. Afterwards, the water should have a slight chlorine odor. If not repeat the dosage and let stand for another 15 minutes before use. After this treatment, the water may be left open to reduce the chlorine smell and taste. [22] [6]
Common examples include sodium hypochlorite (household bleach) and calcium hypochlorite (a component of bleaching powder, swimming pool "chlorine"). [1] The Cl-O distance in ClO − is 1.69 Å. [2] The name can also refer to esters of hypochlorous acid, namely organic compounds with a ClO– group covalently bound to the rest of the molecule.
Ads
related to: chlorine powder for water tank repair fittingsuswatersystems.com has been visited by 10K+ users in the past month