Search results
Results from the WOW.Com Content Network
The engine was first tested on the Pratt & Whitney Boeing 747SP on July 11, 2008 through mid-August 2008, totaling 12 flights and 43.5 flight hours. [14] It then flew starting October 14, 2008 on an Airbus A340-600 in Toulouse on the number two pylon. [15] Testing of the CSeries bound PW1524G model began in October 2010. [16]
In December 1980, Pratt & Whitney changed to a new naming system for its engines and the JT10D became the PW2037. The PW2000 is a dual-spool, axial air flow, annular combustion, high bypass turbofan with a dual-channel full authority digital engine control system. It was certified in 1984 as the first civilian FADEC-controlled aviation engine.
The engine delivers thrust in the 35,000 lbf (156 kN) class and was designed for sustained supersonic flight without afterburners, or supercruise. Delivering almost 22% more thrust with 40% fewer parts than its F100 predecessor, the F119 allows the F-22 to achieve supercruise speeds of up to Mach 1.8.
The average engine stays on wing 13,500 flight hours before a shop visit (a Shop Visit Rate of 0.073 per thousand hours). It is claimed to be cumulatively 3.4 dB quieter than other engines in its class. [1] Like other modern aircraft power plants, it has a Full Authority Digital Engine Control (FADEC), for better fuel economy and reliability. [4]
The JT8D is an axial-flow front turbofan engine incorporating a two-spool design. There are two coaxially-mounted independent rotating assemblies: one rotating assembly for the low pressure compressor (LPC) which consists of the first six stages (i.e. six pairs of rotating and stator blades, including the first two stages which are for the bypass turbofan), driven by the second (downstream ...
The first flight after the 50-hour qualification test, required for a new engine that is the sole source of thrust for a flying testbed, was on 8 December 1955, powering the second pre-production Douglas F4D Skyray, with the J79 in place of its original Westinghouse J40 engine as part of the General Electric development and qualification program.
The engine was produced from 1951 to 1965 with a total of 21,170 built. Many J57 models shipped since 1954 contained 7-15% of titanium, by dry weight. Commercially pure titanium was used in the inlet case and low-pressure compressor case, whereas the low-pressure rotor assembly was made up of 6Al-4V titanium alloy blades, discs and disc spacers.
The Pearl engine was developed in Dahlewitz from the BR700 with Advance2 technologies. [16] EASA certification was applied for on 28 February 2015. [9] It made its first ground run in 2015, type tests in 2016, and flight tests in 2017. [17] Six test engines logged over 6,000 cycles on 2,000 test hours. [18]